Section 1: Safety
11.Before inspecting the unit or making any adjustments, or if the unit jams or becomes clogged, shut the engine off immediately and allow all moving parts to come to a stop. Disconnect the spark plug wire from the spark plug and secure the wire away from the spark plug. Use only a wooden stick (at least 3 feet long) to clear away any blockage.
12.Keep all guards, covers, shields and safety devices in place and in good working condition. Do not attempt to defeat the purpose of any safety device.
13.Exercise extreme caution on slopes.
14.Do not attempt to clear steep slopes.
15.Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes.
16.Always observe the terrain. Watch for and avoid obstacles. Stay away from holes, ditches, soft or steep embankments and other potentially dangerous terrain. Deep snow can hide obstacles and
17.Do not use the unit near
18.Do not operate the unit at high transport speeds on slippery surfaces. Wet surfaces reduce traction and stability.
19.Look behind and use care when operating the unit in reverse. If you have to pull the unit backward, disengage the auger and wheel drives. Always check behind you for hazards.
20.Be extremely careful when using the unit near blind corners, shrubs, trees, and other objects that may obscure vision.
21.Be extremely careful when operating near or crossing gravel drives, walks or roads. Stay alert for hidden hazards or traffic.
22.Remove any hearing protection and watch for traffic when operating near, or when crossing roadways.
23.Do not leave the unit unattended with the engine running. Stop the engine, let all moving parts come to a stop, and disconnect the spark plug wire from the spark plug before leaving the unit.
24.Use only attachments and accessories that are approved for use with the unit. Contact the factory customer service department, at the address and phone number on page 3, if you are not sure about the use of any attachment or accessory.
25.Operate the unit only in daylight or in good artificial light.
26.Do not tamper with the engine governor settings. The governor controls the maximum safe engine operating speed and protects the engine and moving parts from damage. Contact your local engine dealer for service if a problem exists.
27.Shut off the engine, disconnect the spark plug wire and secure the wire away from the spark plug, before transporting the unit in a vehicle.
28.Do not touch the muffler or other engine parts which may be hot from operation. Wait for parts to cool completely before inspecting, cleaning, or repairing the unit.
29.Never operate the unit near buildings, glass enclosures, automobiles, window wells,
30.Never direct discharge at persons, animals, vehicles or buildings. Never allow anyone in front of the unit when the engine is running.
31.Disengage the auger drive when the unit is being transported or is not in use.
32.Disengage the auger and wheel drives if you are approached by any child, inattentive person or pet.
33.Run the unit for a few minutes after use to prevent
Maintenance and Storage
1.When the unit is stopped for servicing, inspection, storage, or to change an attachment or an accessory, disconnect the spark plug wire from the spark plug and secure the wire away from the plug. Let the engine cool before making inspections, adjustments, or performing any maintenance.
2.Maintain the unit and all attachments and accessories in safe working condition.
3.Never perform any maintenance while the engine is running, or when the spark plug wire is connected to the spark plug.
4.Do not store the unit or fuel container inside an enclosure where there is an open flame or spark, or where ignition sources are present, such as: hot water and space heaters, furnaces, clothes dryers, stoves, electric motors, etc.
6