Troy-Bilt Specifications, Snowthrower Models 42010, 42012, 42030, Tires, Engine Oil, Fuel

Specifications

Specifications

Below is a list of specifications for your snowthrower. The information is the most current at the time this manual was printed.

	Snowthrower Models 42010, 42012, 42030, & 42031
	Snowthrower		Carburetor	Float type, primer and choke– winterized
	Height	To top of handlebar levers: 41.5" (105.3 cm)	Governor	Mechanical
	...........w/o handlebars, deflector cap down: 33" (83.75 cm)		High Speed	3450 RPM
	Length	With handlebars: 70" (177.6 cm)	Idle Speed	1700 RPM
	....................................	Without handlebars: 41.0” (104 cm)	Speed Setting	3450 RPM
	Weight (approximate)		Lubrication	Splash system
42010, 42030		295 lbs. (134 Kg)	Oil Fill	Extended oil fill and dipstick on top of cylinder
42012, 42031		315 lbs. (143 Kg)	Oil Drain	Rear
	Tires		Engine Oil
	Type	2-ply	Type	Refer to engine owner’s manual
	Size	4.80/4.00 x 8		for manufacturer’s recommendations
	Air Pressure	8 to 12 psi (55-82 kPa)	Capacity	26 U.S. ozs. (0.77 L)
	Clearing Width	42010,42030: 24" (61 cm)	Ignition	Electronic
	.............................................................	42012, 42031: 26" (65.6 cm)	Spark Plug
	Engine		Type/Gap	Refer to engine owner’s manual
42010, 42030		8 H.P. (5.97 kW) Tecumseh HMSK80	Fuel
42012, 42031		10 H.P. (7.46 kW) Tecumseh HMSK100	Type	Unleaded Regular
	Type	“Snow King”, winterized, 4-cycle, air-cooled
			Tank	1 U.S. gallon (3.79 L), fuel shut-off valve
	Displacement
			Filter	Fine mesh, molded into tank
42010, 42030		42.18 cid (0.691 L)
			Gear Case
42012, 42031		49.98 cid (0.769 L)
			Type	Impeller shaft with worm gear
	Bore x Stroke
			Gear Oil	SAE 90-weight gear oil
42010, 42030		3.125 x 2.5312 in. (79.9 x 64.31 mm)
			Wheel Drive	7 speeds (5 Forward, 2 Reverse)
42012, 42031		3.3125 x 2.5312 in. (84.14 x 64.31 mm)

30