(Continued)
| Item |
| Specifications | ||
|
|
| |||
| For print head | 4.2 to 8.5 VDC (4 or 5 | |||
| Approximately 3.0 A (peak value, 7.2 V, 100% printing ratio) | ||||
|
| ||||
Operating |
|
|
|
| |
| 4.2 to 8.5 VDC (4 or 5 | ||||
voltage | For motor | ||||
Average 0.7 A or less |
| ||||
|
|
| |||
|
|
|
| ||
| For logic | 5 VDC ± 5%, 0.15 A |
| ||
|
|
| |||
Weight |
| Mechanism: approximately 75 g. Interface board: approximately 60 g | |||
|
|
| |||
Printer mechanism | Dimensions | 73 (W) × 49 (D) × 20 (H) mm (excluding knob, lever, and flexible PC board) | |||
|
|
|
| ||
Interface board | Dimensions | 108 (W) × 91 (D) × 18 (H) mm |
| ||
|
|
| |||
Thermal head life |
| Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard | |||
|
| driving method) |
| ||
|
|
|
| ||
|
| Wear resistance: 50 km (at 25% printing ratio) | |||
|
|
|
| ||
| Operating temperature | +5 to +40°C*3 |
| ||
Environmental |
|
|
|
| |
Operating humidity | 20 to 85% RH (no condensation) |
| |||
conditions |
| ||||
|
|
|
| ||
| Storage temperature |
| |||
|
|
|
| ||
| Storage humidity | 5 to 95% RH (no condensation) |
| ||
|
|
|
| ||
| Head temperature | By thermistor |
| ||
|
|
|
| ||
Detection | Paper out/Mark detect | By photointerrupter (command set) |
| ||
|
|
|
| ||
| Voltage | By micro controller |
| ||
|
|
|
| ||
| By microswitch |
| |||
|
|
|
|
| |
Paper width |
|
|
| ||
|
|
|
|
| |
Recommended thermal sensitive paper | 1 ply (roll) | : | Long life (roll) : | ||
|
| Label (roll) | : | 2 ply (TCC) : | |
|
| 2 ply (roll) | : |
| |
|
|
|
|
|
*1: Character composition for single density reduced mode is the same as for single density standard mode.
*2: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.
*3: Temperature range for guaranteed printing density. It can be operated in the range of 0 to +40°C.
3