Fujitsu FTP-623DCL002 manual Overview, Highlights, High speed printing, Compact and lightweight

BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2” TYPE MECHANISM AND INTERFACE BOARD

FTP-623MCL400/FTP-623DCL002

■OVERVIEW

This battery driven, micro line thermal printer provides high speed printing for 2-inch wide (58mm) paper. It is suitable for portable equipment that requires compact, light weight components.

In addition to the interface board, a driving LSI (MCU + Gate Array) is also available.

■HIGHLIGHTS

•Driven by batteries (direct connect between thermal head and batteries)

It can be driven by a broad range of voltages (4.2 to 8.5 V) of NiCd or Nickel-Hydrogen by using Fujitsu Components' unique head drive control system. The battery pack can be connected directly to the print head without a voltage regulator. Also, a lithium-ion battery can be used.

•High speed printing

It can print at approximately 23 character lines/s (460 dotlines/s =

57.5mm/s).

•Compact and lightweight

It has a light weight of approximately 75 g.

• Low power consumption

The peak current for head driving is approximately 3.0 A.

• Selectable paper paths

Front, rear, and top paper insertion paths can be used.

• Paper auto loading function

Paper feeding is enabled by operating the head up lever.

• Variety of suitable papers

This model is suitable for printing on a variety of papers, including 1-ply roll paper, 2-ply paper (TCC and roll), labels, and long-life paper.

FTP-623MCL400

FTP-623CU001, FTP-633GA101

FTP-623DCL002

1