[MIC LEVEL]
When recording, the input level from the
≥Change the mode to 
.
≥Set the iA/MANUAL/FOCUS switch to manual mode. (l 63) 1 Select the menu.
MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: |
| AGC is activated, and the recording level is adjusted |
|
| automatically. |
[SETr | ]/[SET]: | The desired recording level can be set. |
|
|
|
2(When [SETr
]/[SET] is selected)
Adjust the microphone input level using the cursor button right or left.
≥ Select 
using the cursor button and press the cursor button in the center to activate/ disactivate AGC. When AGC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When AGC is disactivated, natural recording can be performed.
≥Adjust the microphone input level so that the last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a lower setting for microphone input level.
3Select [ENTER] using the cursor button and press the button in the center to determine the microphone input level, then select [EXIT] and press the button in the center.
≥
(Microphone input level meter) is displayed on the screen.
≥When changing to intelligent auto mode, the setting is fixed to [AUTO] and cannot be changed.
≥When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥The microphone input level meter shows the larger of the inputs from the microphones.
≥You cannot record with the audio completely muted.
57
VQT3Q78