Preparation
Setup | 6 Setting date and time |
|
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬Change the mode to or .
1 Select the menu.
MENU : [SETUP] # [CLOCK SET]
2 Select the date and time to be set using the cursor button right or left, then adjust the desired value using the cursor button up or down.
ADisplaying the World time setting (l 40):
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and 2039.
≥The
≥The date and time function is driven by a
≥If the time display becomes [-
6 months. (The battery is still being recharged even if the unit is off.)
3 Select [ENTER] and press the button in the center.
≥The clock function starts at [00] seconds.
≥A message prompting for World time setting may be displayed. Perform the World time setting. (l 40)
≥Select [EXIT], then press the button in the center or press the MENU button to complete the setting.
27
VQT3Q78