Samsung VKKF004NUS user manual Total System Configuration, Internet

connecting with other device

Total System Configuration

You can use the 10/100 Mbps Ethernet connector on the product to connect to the network. Connecting to the network enables you to perform various functions including remote monitoring, remote search and remote control.

IP Router or HUB

DVR

Cable/ADSL Modem	INTERNET
or
	DDNS Server
Direct LAN (Fixed/Static IP)
	(websamsung.net)

DVR

Local PC #1 Local PC #2 External Remote PC #1 External Remote PC #2

1.Connect LAN cable of Cable/ADSL modem or Direct Fixed/Static IP LAN Line to WAN port of IP Router.

2.Connect LAN ports of IP Router to Ethernet port DVR to be set up and to Ethernet port of Local PC to use during setup.

3.Connect Video cable of Camera to Monitor.

4.Turn on the Monitor power.

If you have a Static (Fixed) IP line or Dynamic IP line (Cable Modem or ADSL Modem) with one IP address (whether it's dynamic or fixed), but have more than one internet device to use (such as a PC and a DVR or several DVRs): you must use an IP Router (different from a simple Network Hub); You must set up the Router to work with the DVR and you must use a network capable PC within The local Router network to do the setup.

If you are using an existing Router which is already set up, you may not need to redo the basic setup of the Router again, but it is highly recommended that you at least read all the instructions below and go through the steps. Whether you are using an existing Router or a new Router, you must go through the Port Forwarding portion of the setup.

18_ connecting with other device

Lo-Call 1890 866 900 www.cctvireland.ie