FEATURE
Durable engineered plastic top, 94VO, outdoor and pressurized models are UV protected.
Accepts many manufacturers’ unitized camera systems.
Accepts single fixed camera.
Available in wall or pendant mount.
Temperature rating
DESCRIPTION:
All plastic components are designed to be UV stable; the housing top is rated at 94VO. The wall mountunit measures 11.5" (w) x12.9 (h) x 16" (d), with a weight of 7 lbs.; measurements for the pendant mount unit are 11.5" (w) x 12.9" (h) x 11.5" (d), 7 lbs. Flying leads are provided for all incoming power, control, and video connections. The leads are supplied with a standard BNC and screw down connectors. A 22 watt heater and a circulation blower are also provided. To service, remove the lower dome and ring assembly.
ELECTRICAL SPECIFICATIONS:
Input power : Housing & Camera - 12 VDC
22 watts at 12 VDC Heater : 20 watts Blower : 2 watts
Notes | ·The heater activates at 40 F ( 8 F), deactivates at 60 F ( 8 F). | |
·The blower always activates. | ||
|
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver Phillips Head Screwdriver
PREPARING PENDANT MOUNT BRACKET (For wall mount see page 7)
1.Carefully remove the housing from the packaging material. Check to be sure all parts are present.
2.This unit includes a 1 1/2" NPT housing coupling that can be used with a standard 1 1/2" NPT pipe.
3.Attach the housing coupling to the bracket or pendant pipe (Figure 1).
·This unit can be used with brackets designed with 1 1/2" male pipe
Notes | threads that don’t be supplied. |
|
·Pipe threads should be clean and rust free. Use a sealer (such as Teflon™ tape or silicone sealer) on the threads.
Add thread 
sealing tape
Figure 1
Be sure the bracket is properly and securely mounted to a supporting structure capable of rigidly holding the weight of the entire unit.
4 | OUTDOOR DOME HOUSINGS | OUTDOOR DOME HOUSINGS | 5 |