Toshiba 120/150 1, 2, 3

8-8 APPENDIX

Misfeed removal

The copier will stop when a misfeed occurs. The misfeed ( ) indicator blinks or blinks in the

display.

1Open the lower side cover (under the bypass tray) and remove the misfed paper.

If blinks and the misfed paper is not seen from the area of the lower side cover, pull out

the lower paper tray and remove the misfed paper. Then close the lower paper tray.

2Close the lower side cover.

3Close the side cover by pressing the round projections near the side cover open button. The

misfeed ( ) indicator will go out and the start ( ) key will light up.

Specifications

Copy paper size A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 14")

Paper weight 56 to 80 g/m2 (15 lbs. to 21 lbs.)

Paper capacity One paper tray with capacity for 250 sheets of 80 g/m2 (21 lb.) bond paper

Weight Approx. 3 kg (6.6 lbs.)

Dimensions 498 mm (W) x 395 mm (D) x 88 mm (H)

(19.6" (W) x 15.6" (D) x 3.5" (H))

Power supply Drawn from the copier

As a part of our policy of continuous improvement, TOSHIBA reserves the right to make

design and specification changes for product improvement without prior notice. The

performance specification figures indicated are nominal values of production units. There

may be some deviations from these values in individual units.

Contents

Main ',6&/$,0(5127,&( Page Page Page Page 6 CAUTIONS Caution label on the unit Cautions on using Warning: Caution: 7 Cautions on handling Cautions on laser Proper storage for supplies Trademark acknowledgements CONTENTS Page Page Page 1-2 USING THE MANUAL Conventions used in this manual AB series (metric) and inch series references PART NAMES 1-3 Photoconductive drum Toner cartridge 1-4 OPERATION PANEL 11 12 1513 16 1714 1 3 94 5 6 7 8 10 2 Page 2-2 PAPER Transparency film Envelope* 2-3 2-4 LOADING THE PAPER TRAY 1 2 3 4 2-5 2-6 BYPASS FEED (including special paper) 1 original cover. 2 Page Page 3-1 Making Copies Page 3-3 CONNECTING THE POWER CORD 1 into the power cord socket at the rear of the unit. 2 Power on Page 3-5 ORIGINAL PLACEMENT 1 2 1 Setting a large original 3-6 SET THE COPY QUANTITY 1 EXPOSURE ADJUSTMENT/PHOTO COPYING 2 Exposure adjustment 3-7 1 2 4 3 3-8 1 3 2 ratio. Page Page Page 4-2 DESCRIPTION OF SPECIAL FUNCTIONS 1 Toner save mode (p. 4-2) Power save modes (p. 4-3) Preheat mode Auto power shut-off mode 2 3 2 1 4 4-3 USER PROGRAMS 4 4-4 number will blink on the right of the display. 2 5 Maintenance 5-2 TONER CARTRIDGE REPLACEMENT 1 2 3 4 5 5-3 6 5-4 CLEANING THE UNIT Page Page 6-2 Troubleshooting 6-3 STATUS INDICATORS Be sure to use only genuine TOSHIBA parts and supplies. 6-4 MISFEED REMOVAL 1 2 6-5 A: Misfeed in the paper feed area 1 2 B: Misfeed in the fusing area 1 2 3 2 1 6-6 C: Misfeed in the transport area 4 Page 7-1 Installing the Software SOFTWARE FOR THE TOSHIBA PERSONAL MFP SERIES 7-3 HARDWARE AND SOFTWARE REQUIREMENTS BEFORE INSTALLATION 7-4 Flow of installation 7-5 INSTALLING THE SOFTWARE 2 MFP 4 Installing onto Windows XP (USB/parallel interface) then click the Next button. 5 6 7-6 7 9 7-7 7-8 7-9 Installing onto Windows 98/Me/2000 (USB interface) 2 4 5 then click the Next button. 6 7-10 7 9 11 7-11 7-12 Installing onto Windows 95/98/Me/NT4.0/2000 (Parallel interface) 2 4 6 5 7 7-13 was selected in step 4). 9 7-14 7-15 INDICATORS ON THE OPERATION PANEL Start indicator Power save indicator ONLINE indicator Scanner indicator 1 2 3 1 4 3 How to print 2 4 7-17 then click the Print button to start printing. 1 About interrupt copying 1 Using the Button Manager 4 Setting up the Button Manager Windows XP 1 2 5 4 3 7-20 Scan Parameter Setting Dialog Box Flow of the Button Manager setting 7-21 7-22 Using the SCANNER key to begin scanning 1 3 2 of the application that you wish to use for scanning. 1 7-23 Opening the scanner driver and scanning from your computer 2 1 Using the TOSHIBA TWAIN File menu and select Select Scanner. 3 4 5 7-24 7-25 1 2 6 5 4 1 2 3 4 Page Page 7-29 CONNECTING THE INTERFACE CABLE Interface cable Parallel interface cable 1 2 3 Page Page 8-2 SPECIFICATIONS 8-3 Software Printer/Scanner 8-4 OPTIONAL EQUIPMENT System configuration Auto document feeder (MR-2014) Part names 8-5 Specifications Using the ADF 8-6 Stream feeding mode Misfeed in the ADF 8-7 250-SHEET PAPER FEED UNIT (MY-1019) Side cover Tray Part names Loading copy paper 1 2 3 Specifications 8-9 INDEX D E F H 8-10 M N O P 8-11 SOFTWARE LICENSE 2. Restrictions. 3. Termination. 4. Export Law Assurances. 8-12 7. Disclaimer of Warranty on Software. 8. Limitation of Liability. 9. Controlling Law and Severability. 10. Complete Agreement.