DESCRIPTION OF SPECIAL FUNCTIONS

Toner save mode (p. 4-2)

Reduces toner consumption by approximately 10%.

Power save modes (p. 4-3)

The unit has two power save modes of operation: preheat mode and auto power shut-off mode.

Preheat mode

When the unit enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a lower heat level, thereby saving power. To copy from the preheat mode, make desired copier

selections and press the start ( ) key using the normal copying procedure.

Auto power shut-off mode

When the unit enters the auto power shut-off mode, the power save ( ) indicator will light up and other indicators except the ONLINE indicator will go out. The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the

auto power shut-off mode, press the start ( ) key. Then make desired copier selections and

press the start ( ) key using the normal copying procedure.

Auto clear (p. 4-3)

The unit returns to the initial settings a preset amount of time after the end of copy, or scanner job. This preset amount of time (auto clear time) can be changed.

Resolution of AUTO & MANUAL mode (p. 4-3)

You can set the copy resolution used for AUTO and MANUAL ( ) exposure mode.

TONER SAVE MODE

1 Press the exposure mode selector key to select the

MANUAL ( ) mode.

4-2SPECIAL FUNCTIONS

Page 35
Image 35
Toshiba 120/150 manual Description of Special Functions, Toner Save Mode