SET THE COPY QUANTITY

Set the number of copies using the two copy quantity ( , ) keys when copying from the original table.

Press the clear ( ) key to clear an entry if a mistake is made.

A single copy can be made with the initial setting, i.e., when “1” is displayed.

Press the key to count up the copy quantity from 1 to 99. (A fast countup will

 

be carried out while you press and hold down the

key.)

 

Also, if the

key is pressed while 99 appears, the copy quantity becomes 0

 

and the count from 1 to 99 is restarted.

 

If the

key is pressed, the copy quantity becomes 0 and is counted down from

 

99 to 1. (A fast countdown will be carried out while you press and hold down the

 

key.)

 

 

 

When the

 

key is pressed during copying, the number of copies is displayed.

EXPOSURE ADJUSTMENT/PHOTO COPYING

Exposure adjustment

Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually.

The copy resolution used for AUTO and MANUAL () mode can be changed. (p. 4-3)

1 Press the exposure mode selector key to select the MANUAL

( ) mode or PHOTO ( ) mode.

2 Use the light ( ) and dark ( ) keys to adjust the exposure level. If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously.

3-6MAKING COPIES

Page 29
Image 29
Toshiba 120/150 manual SET the Copy Quantity, Exposure ADJUSTMENT/PHOTO Copying, Exposure adjustment