Toshiba 120/150 manual Displaying Total Number of Copies, Program Mode Parameters

4 Select the desired parameter using the copy quantity ( ) key. The entered parameter number will blink on the right of the display.

Program	Mode		Parameters
No.
1	Auto clear time	0 -> OFF, 1 -> 10 sec., 2 -> 30 sec., *3 -> 60 sec.,
		4	-> 90 sec., 5 -> 120 sec.
2	Preheat mode	*0 -> 30 sec., 1 -> 60 sec., 2 -> 90 sec.
3	Auto power shut- off timer	0	-> 2 min, *1 -> 5 min., 2 -> 15 min., 3 -> 30 min.,
		4 -> 60 min., 5 -> 120 min.
4	Stream feeding mode	0 -> OFF, *1 -> ON
5	Auto power shut- off mode	0 -> OFF, *1 -> ON
6	Resolution of AUTO &	*0 -> 300 dpi, 1 -> 600 dpi
	MANUAL mode

* Factory default settings are indicated with an asterisk (*).

5 Press the start ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored.

To change the setting or to set another mode, press the clear ( ) key. The unit will return to step 2.

6 Press the light ( ) or dark ( ) key to return to the normal copy mode.

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.

1 Press the clear (	) key to reset the display to zero.
Press and hold down the clear (		) key for approximately 5 seconds. The total number of

2 copies will appear in two steps, each with three digits.

Example: Total number of copies is 1,234.

4-4SPECIAL FUNCTIONS