3-8 MAKING COPIES

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom function enables
copy ratio selection from 25% to 400% in 1% increments.
1Set the original and check the paper size.
2Use the copy ratio selector key and/or ZOOM ( , ) keys to select the desired copy
ratio.
•
To verify a zoom setting without changing the zoom ratio, press and hold down the copyratio display key. When the key is released, the display will return to the copy quantitydisplay.
•
To reset the ratio to 100%, press the copy ratio selector key repeatedly until the 100%indicator lights up.
3Set the reduction/enlargement ratio.
To decrease or increase the zoom ratio rapidly, press and hold down the ZOOM ( ) or( ) key. However the value will stop at the preset reduction or enlargement ratios. Tomove beyond these ratios, release the key and then press and hold it down again.
To select a preset copy ratio:
Preset reduction and enlargement ratios are: 25%, 70%, 86%, 141%, and 400%
(Inch series: 25%, 64%, 78%, 129%, and 400%).
To select a zoom ratio:
When a ZOOM ( ) or ( ) key is pressed, the ZOOM indicator will light up
and the zoom ratio will be displayed in the display.