Panasonic C7401U XM Tuner, Selection by Category, Preset channel selection, Channel selection

XM Tuner

The optional XM receiver allows you to receive the XM radio service.

	1 Press [SRC] (Source) to select the XM	SRC	CQ-C8401U
	Satellite Radio mode.
	2 Press [BAND] to select a band.
Flow		3 Select a channel.
	¡ Connect the optional XM receiver (XMD1000).	Channel selection
Operation	¡ To connect the XM receiver (XMD1000), it is	[]] (TUNE): Preceding channel
	Notes:
		Preset channel selection
	required to use an optional extension cord	[[] (TUNE): Next channel
	(XMDPAN100) that is produced by XM exclu-
	sively for Panasonic products.
	¡ “RADIO ID” is displayed with channel 0.	[{] (P·SET: Preset): Lower preset channel
		[}] (P·SET: Preset): Higher preset channel
	¡ “UPDATING” is displayed during the update of the
	identification code.
	¡ “LOADING” is displayed during the acquisition of	Note: Direct selection can be executed with [1] to
	audio data or information.	[6] buttons on remote control.

Selection by Category (P·SET: Preset)

Display)

You can toggle the category on and off every time you hold down [BAND] for 2 sec. or more. If the category is set to on, the unit operates as follows for each button:

SRC CQ-C8401U

Channel selection

[]] (TUNE): Preceding channel in current category

[[] (TUNE): Next channel in current category

Category selection

[{] (P·SET: Preset): Preceding category

[}] (P·SET: Preset): Next category

lights when activated

1 Press [MENU] to display the menu dis-		TEXT
play.		Text display
For using the remote		: Enabled (Default)
control, hold down	CQ-C8401U

[SEL] (MENU) for 2

English

sec. or more.

: Disabled

TunerMode		Preset Number			Channel number/name
	Display	Band			indicates the satellite tuner
XM					is ready.
					Indicates the intensity of
		Artist name/Song title			the radio wave.
		Up to 6 channels can be preset in XM1 to XM3	4 Preset the channel by holding down [}]
		respectively.
		Preset channels can be simply called up by pressing [}]		or [{] for 2 sec. or more.
ChannelPreset		(P·SET) or [{] (P·SET).
	(P·SET:Preset)	Note: Direct selection can be executed with [1] to [6]	¡ In step 2, a channel can be registered by holding
		3 [}] or [{].
		buttons on remote control.
		1 Tune into a channel.		Preset number/channel number blinks once.
		2 Hold down [}] or [{] for 2 sec. or more.	Notes:
		Select a preset number by pressing	¡ New channels overwrite existing saved channels.
			down the numeric button [1] to [6] on remote control
			for 2 sec. or more.
			¡ To stop presetting channels, press [DISP] (Display).

TEXT Setting (XM Tuner Menu

Functions Only by Remote Control Unit

2 Press [BAND] (SET) to adjust.

3 Press [MENU] to confirm the

CQ-C8401U

adjustment.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

Direct Access

A channel can be directly selected.

Example: channel number 5

1 Press [#] (NUMBER).

2 Press [5].

3 Press [SET].

Note: To suspend direct selection, press [DISP] (Display).

XM Tuner

28 CQ-C8401U/C8301U/C7401U/C7301U CQ-C8401U/C8301U/C7401U/C7301U 29