Panasonic C7401U, CQ-C8401U, C7301U, C8301U Display Setting, Customize Menu Display

Display Setting

Adjustment to display on the DISPLAY menu

1 Press [MENU] to display the menu display.

STILL IMAGE

(Setting range: 11types, Default: All)

Customize the Display (Customize Function)

You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software, IMAGE STUDIO. See “Notes on Customize function” (a page 38) as well.

Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.

		For using the remote		CQ-C8401U
		control, hold down
		[SEL] (MENU) for 2
		sec. or more.
	2 Press []] or [[] to display the
		DISPLAY menu.
	3 Press [}] or [{] to select a function to
		be adjusted.
	4 Press [BAND]
		(SET) to confirm			CQ-C8401U
		the display.
Display	5 Adjust the setting value.
	6 Press [BAND] (SET).
Menu	7 Press [MENU] to confirm the
		adjustment.
		For using the remote control, hold down [SEL]
DISPLAY		(MENU) for 2 sec. or more.
	GRAPHIC PATTERN
	(Setting range: 6 types, Default: All)
	Switching by []] or [[]
	All:		Sequential display from pattern A to D.
	Pattern A-D
	S.A.:		19-band display (Spectrum analyzer)

Switching by []] or [[]

All: Sequential display from pattern 1 to 10

No.1-10

CONTRAST

(Setting range: 1 to 5, Default: Contrast 3)

[[]: Tilting up view angle

[]]: Tilting down view angle

CLOCK ADJ

Note: Adjust the clock when “ADJUST” appears on the display.

[[]: Adjusting minutes

[]]: Adjusting hours

[}]: Forward

[{]: Backward

Notes:

¡The graphic pattern and still image are changeable. (a page 37)

¡If corrupted data is selected, “DISPLAY FILE INCOM- PLETE” appears. (a page 38)

CUSTOMIZE Menu Display

Preparation:

Put the CD-R/RW that contains data to be customized in hand.

1 If there is a disc inside, take out the disc.

2 Press [SRC] to

select the CD	SRCSRC
mode.

3 Hold down [SEL] for 4 sec. or more to display the menu screen.

4 Load a CD-R/RW that contains data.

Note:

¡It may take time for the unit to identify the CD- R/RW.

¡Discs recorded by the packet writing software are not supported.

5 Select an item to be customized.

[}][{]: Select

[BAND] (SET): Confirm

Note: To exit the customize menu, hold down [SEL] 4 sec. or more.

GRAPHIC PATTERN

Moving image (graphic pattern) data (a page 36)

STILL IMAGE

Still image data (a page 36)

OPENING MESSAGE

Moving image at power on (a page 14)

CLOSING MESSAGE

Moving image at power off (a page 14)

6 Select a file.

[}][{][]][[]:Select

[BAND] (SET): Confirm

Notes:

¡Files are automatically identified by their exten- sions, and target files are displayed.

¡If ”BACK” is selected, the screen of step 5 appears.

7 For a moving image file or still image file, select where to save the file.

[]][[]: Select

[BAND] (SET): Confirm

Notes:

¡New data overwrites existing data.

¡If “BACK” is selected, the screen of step 6 appears.

8 Confirm the changed item.

[]][[]: Select

[BAND] (SET): Confirm

Customization is performed. Do not turn off the power in mid-operation. (It takes approx. 1 minutes to complete this operation for a 168 kB moving image.) After completion of this operation, the screen of step 5 appears.

Note: If “NO” is selected, the screen of step 5 appears.

9 Hold down [SEL] 4 sec. or more.

The CD mode comes back. Press the [OPEN] but- ton to eject the disc.

English

Display Setting, Customize the Display (Customize Function)

36 CQ-C8401U/C8301U/C7401U/C7301U CQ-C8401U/C8301U/C7401U/C7301U 37