The selected application launches and scanning begins. If the following screen appears, select Button Manager and click “OK”. Button Manager starts and the application associated with Button Manager starts. If you want only Button Manager to start in this case, set up Button Manager for use in Windows as explained in See “Setting up the Button Manager” (p. 7-18).

1 Press the start () key.

Opening the scanner driver and scanning from your computer

Follow the steps below to open the scanner driver setup screen. As an example, this instruction is given using Desktop Document Manager as an image capture application.

Scanning is not possible during a copy and print job.

The method for starting the scanner driver differs depending on the type of application.

Refer to the manual or the help file of your application.

Using the TOSHIBA TWAIN

1

2

Place the original you wish to scan on the original table.

For the procedure for placing the original, see “ORIGINAL PLACEMENT” (p. 3-5).

After starting Desktop Document Manager, click the “File” menu and select “Select Scanner”.

Click here

7-23

Page 74
Image 74
Toshiba 120/150 Opening the scanner driver and scanning from your computer, Using the Toshiba Twain, Press the start key