MISFEED REMOVAL

When the misfeed ( ) indicator blinks or in the display, the unit will stop because of a misfeed.

1

2

Open the side cover, in that order.

To open the side cover, see “TONER CARTRIDGE REPLACEMENT” (p. 5-2)

Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to “A: Missfeed in the paper feed area” (p. 6-5).

If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area".

If paper is misfed here, proceed to "B: Misfeed in the fusing area".

If paper is misfed here, proceed to "A:

Misfeed in the paper feed area".

6-4TROUBLESHOOTING

Page 47
Image 47
Toshiba 120/150 manual Misfeed Removal