Ver 1.80E
2.Command
2.1 Pan/Tilt/Zoom/Focus/Brightness
Cmd1 | Cmd2 | Data1 | Data2 | Data3 | Data4 | |
Direction1 | Direction2 | Pan Speed | Tilt Speed | Zoom Speed | XXh | |
/Focus Speed | ||||||
|
|
|
|
| ||
|
|
|
|
|
|
The frame above is located at Byte4 to Byte9 in the command packet.
: |
|
|
|
|
|
| ||
Direction1 is to process the Brightness and Focus commands. |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| Command1 |
|
|
| |
bit7 |
| bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 |
* |
| * | * | Brighter | Darker | * | Focus Near | Focus Far |
|
|
|
|
|
|
|
|
|
Diredtion2 is to process the Zoom, Pan and Tilt commands as shown in the chart below.
Command2
bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 |
|
|
|
|
|
|
|
|
| Zoom Wide | Zoom Tele | Tilt Down | Tilt Up | Pan Left | Pan Right | always 0 |
|
|
|
|
|
|
|
|
Note: For these commands, bit0 must be retained as '0' at all times. Changing it to '1' fails to
execute the commands shown in the chart above.
The speed of Pan, Tilt, Zoom, and Focus is available as shown below.
Note: The function of Zoom/Focus Speed, depending on the product, can not be supported.
Important!: The Zoom and Focus commands cannot be transmitted simultaneously.
2.2 OSD Menu Control
2.2.1 OSD(On Screen Display) Menu On:
| Cmd1 | Cmd2 | Data1 | Data2 | Data3 | Data4 |
| 00h | B1h | 00h | 00h | 00h | 00h |
|
|
|
|
|
|
|
2.2.2 OSD Menu Off |
|
|
|
| ||
|
|
|
|
|
|
|
| Cmd1 | Cmd2 | Data1 | Data2 | Data3 | Data4 |
| 00h | B1h | 01h | 00h | 00h | 00h |
|
|
|
|
|
|
|
2.2.2 Menu Enter |
|
|
|
| ||
|
|
|
|
|
|
|
| Cmd1 | Cmd2 | Data1 | Data2 | Data3 | Data4 |
| 01h | 00h | 06h | 00h | 00h | 00h |
|
|
|
|
|
|
|
*The Focus command may be activated automatically in Normal
- 5 -