Samsung SVD-4600 manual Operating Your Camera

Connection

RS-485 communication control

Connecting to RS-485 Control Cable

CONTROL CABLE	SPEC
RED (TRX+)	RS-485+
WHITE(TRX-)	RS-485-

Using a RS-485 communication, it will be able to control the OSD menu at the SAMSUNG TECHWIN System Controller or DVR.

(1)The case which it controls from the PC

Using a RS-485 converter, It connects to RS-485 control cable outside camera and serial cable

EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485

CONTROL CABLE

(2)The case which it controls from the DVR or System Controller

It connects the RS-485 control cable in the connection terminal of 485 control boards which are connected with the DVR or System Controller.

485 Control Board Connection Port			RS-485 Control Port
(+) CONNECTION TERMINAL			RED (TRX+)
(-) CONNECTION TERMINAL			WHITE (TRX-)
* RS-485 Communication establishment initial value
Item	Camera ID	BAUD RATE	UART MODE	RET PKT
Initial value	1	9600	8-NONE-1	ENABLE

Notes

•When you construct external control systems for a camera control, please use to the SAMSUNG TECHWIN PROTOCOL or PELCO-D PROTOCOL.

•When you connecting to RS-485 control cable, please peel off the outer skin inside the RS-485 control cable.

•In case of SCC-101 connection, change communication mode to 『8-E-1』at 『Communication configuration』menu. (For more information, refer to SCC-101 manual.)

Operating Your Camera

Menu Configuration

Setup Menu

LENS	●DC
EXPOSURE	●SHUTTER	●AGC	● SENS-UP
	● RETURN
WHITE BALANCE	●ATW	●MANUAL	●AWC→SET
	●OUTDOOR	● INDOOR
BACKLIGHT	● OFF	●WDR	● BLC
	● HLC
SSNR	● ON	● OFF
DAY/NIGHT	● COLOR	●B/W	●AUTO
IMAGE ADJUSTMENT	●FREEZE	●V-REV	● H-REV
(IMAGE ADJ.)	●D-ZOOM	●SHARPNESS	● RETURN
	●CAMTITLE	●SYNC	●MOTION DET
SPECIAL	●PRIVACY	●DIS	●COMM ADJ
	●LANGUAGE	●RESET	●RETURN
EXIT

Menu Setup

Use the Function Setup switch on back of the camera.

Function Setup switch

COLOR CCD CAMERA 12 User Guide COLOR CCD CAMERA 13 User Guide