LC1003A

You’re also given setup controls for selecting your video device and setting your recording frame rate. For example, you can use slower frame rates for smaller video files.

To run the recorder software, you’ll need a PC system with Windows 95/98, Windows 2000, or Windows NT® 4.0; an Intel® Pentium processor; 128 MB of RAM; 1 GB of available disk space; and a screen capable of displaying 16 bits of color or higher.

IP Security View

You may have an application in which you require enhanced video-viewing capabilities. This is where you would need our IP Security View software, which provides single users with sophisticated view-only functions of local and remote camera feeds.

How does this software differ from that shipped with the IP Security Camera? The camera’s included software allows you to view a single image captured by a single camera. The IP Security View software, however, enables you to view up to 16 TCP/IP video streams within a single computer screen.

These streams—displayed in a 4 x 4, split-screen format on your computer—originate from connections made via your LAN/WAN or the Internet to up to 16 IP Security Cameras or IP Security CCTV Connectors (or a combination of the two).

The software features a user-friendly GUI that can be navigated with ordinary mouse and keyboard techniques. Adding the LC1000A cameras or LC1003A units to the IP Security View database can be done quickly and involves entering an IP address and assigning a port address. You can even change your video settings from color to black and white to increase frame refresh rates and modify bandwidth used to improve video speed.

With its activity log, the IP Security View stores logged activities in a database, from which you can export with filtering capabilities to text files.

For the software, you’ll need a PC running Windows 95/98, Windows 2000, Windows NT, or Windows XP with a screen capable of displaying 16 bits of color or higher. A 17" or larger monitor is recommended.

TECH SPECS

IP Security Camera:

Camera Sensor:

Gamma Correction — 0.45

Geometry — Zero geometric distortion Imager — 1⁄3 NTSC color CCD

Iris — Manual models: CCD iris; Auto models: Video-driving auto iris NTSC Video Output Level — Composite, 1 Vp-p

Picture Elements — 512 horizontal x 492 vertical Pixel Size — 9.6 x 7.5

Scanning System — 2:1 interlaced NTSC

Scene Illumination (Minimum) — 2 lux @ F1.4

Signal-to-Noise Ratio — +46 dB

Sync System — Internal sync

White Balance — Auto

Connectors:

Auto Iris Lens — (1) 4-pin square (QQQ)

Composite Video — (1) BNC, 75-ohm, analog

LAN Interface — (1) RJ-45 Category 5

Power — (1) 2-pin screw terminal

Mounts:

Camera — Top or bottom mount, 1⁄4-20 threaded; use included mini bracket

Lens — CS/C mount, adapter included

Performance:

Compression Rate (Maximum) — 30 fps

Nominal Frame Refresh — Color mode: Up to 15 fps; Monochrome mode: Up to 30 fps

Resolution — 330 TV (H) 350 TVLL (V) Video Latency — 1⁄30 of a second

Power:

Power Requirements — 12-VDC, 1.5-A regulated supply

IP Security CCTV Connector:

Connectors:

Composite Video — (1) BNC, 75-ohm, analog

Control Ports — RS-232: (1) DB9 passthrough port;

RS-422/RS-485: (1) RJ-11

LAN Output — (1) RJ-45 Category 5

Relay/Alarm Extender Port — (1) DB9

Power — (1) 2-pin screw terminal

Performance:

Compression Rate (Maximum) — 30 fps

Nominal Frame Refresh: At 128 kbps: Up to 15 fps;

At 256 kbps: Up to 30 fps

Video Latency — 1⁄30 of a second

Power:

Power Requirements — 5-VDC, 500-mA regulated supply

5/3/2007	724-746-5500	blackbox.com
#25498

4 of 5