•When some SDHC/SD memory cards are used with this product, the product may not work properly or performance deterioration may be caused. Use the SDHC/SD memory cards recommended in page 38.
Code label
The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recom- mended to paste one of the labels onto the
About the MOS image sensor
•When continuously shooting a bright light source such as a spotlight, the color filter of the MOS image sen- sor may have deteriorated and it may cause discolor- ation. Even when changing the fixed shooting direc- tion after continuously shooting a spotlight for a cer- tain period, the discoloration may remain.
•When shooting
MPEG-4 Visual Patent Portfolio License
This product is licensed under the
See http://www.mpegla.com.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
About the self-diagnosis function
When this product malfunctions due to exogenous noise, etc. for 30 seconds or more, the product will automatically reset and will return to normal state. When the product is reset, initialization will be carried out as when the power of the product is turned on. When the product repeatedly resets, exogenous noise level around the product may be high and that may cause malfunction. Contact your dealer for instructions.
About the dehumidifying device
This product has dehumidifying device to keep the inside at low moisture level, preventing condensation and quickly dissipating dew if produced.
Dew may be produced depending on the conditions of temperature, humidity, winds, and rain, and it may take time to dehumidify.
Lens and pan/tilt head
If a lens and pan/tilt head are not performed for a long period of time, the grease coating inside these parts may become sticky. That may obstruct the parts from moving. To prevent this, move the lens or pan/tilt head periodically. Or perform position refresh periodically in the manner described in "Position refresh".
Position refresh
During the use for a long period of time, the preset posi- tions may become inaccurate. When "Position refresh" is set for the created schedule, the camera position will be corrected periodically.
Refer to the Operating Instructions (included in the
Consumable parts
The following are consumables: Replace them in accor- dance with their lives. Their lives vary depending on use environment and conditions. Lifetime is just an indication when using the camera at +35 °C {95 °F}.
•Lens unit, panning motor, tilting motor, flat cable for tilting: Approx. 3.7 million operations (Approx. 20000 hours)
Cooling fan: Approx. 52000 hours
Flat cable for panning SW395 : Approx. 3.7 million operations (Approx. 20000 hours)
Slip ring SW396 : Approx. 3.7 million operations (Approx. 20000 hours)
11