Panasonic WV-SW396E, WV-SW395E manual Dents Wire Detach the hooks

Step 5

Attach the front and rear sunshields (accessory) to the camera.

qPut the fingers on the dents of the front and rear sun- shields to detach the hooks. The sunshields will be divided into two parts.

For loss prevention, one side of the front and rear sunshields are linked together with a wire.

Dents

Wire

Detach the hooks.

w Locate the front and rear sunshields to the position that covers the housing base.

Housing base

Important:

•Joint both sides of the front and rear sunshields before fitting in the main sunshield.

•Do not trap the safety wire inside.

•The safety wire is designed to support only the weight of the camera when the camera falls.

Do not put an excessive weight that the safety wire cannot support.

Step 6

Fit the front and rear sunshields in the main sunshield. Align "h" of the rear sunshield to "g START" of the main sunshield. Then, turn the front and rear sunshields toward "g LOCK" until a click is heard.

Front and rear sunshields

Main sunshield

Align "h" to this "g".

Step 7

Fix the front and rear sunshields on the camera using the front/rear sunshield fixing screw (accessory). (Recommended tightening torque: 0.72 N·m {0.53 lbf·ft})

Front and rear sunshields (accessory)

eJoint both sides of front and rear sunshields.

Joint the hook and dent on the linked side, and then joint the other side.

Front and rear sunshields

Main sunshield

Safety wire

Front/rear sunshields fixing screw

Important:

•When the power of the camera is turned on, the cam- era will start panning and the position will automati- cally be initialized.

Note:

•When removing the front and rear sunshields, perform steps 5 - 7 in the reverse order.

21