Axis Communications Q3505-V user manual Reset to Factory Default Settings, Plain Config

Page 57

AXIS Q3505–V Fixed Dome Network Camera

System Options

Plain Config

Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page.

To open Plain Config, go to System Options > Advanced > Plain Config . Axis Support does not provide assistance.

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Disconnect power from the product.

2.Press and hold the control button and reconnect power. See Hardware Overview on page 6 .

3.Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.

4.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5.Using the installation and management software tools, assign an IP address, set the password, and access the video stream. It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

57

Image 57

Contents Axis Q3505-V Fixed Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q3505-V Fixed Dome Network Camera Table of ContentsReset to Factory Default Settings Hardware Overview Connectors and Buttons Function Button LED IndicatorsColor Indication CompletedAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode PTZ ModeSet Power Line Frequency Live ViewGo to Setup Events Controls on the Live ViewManual Trigger PTZ Controls Axis Media Control viewer toolbarTo show the manual trigger buttons in the Live View AMC Audio ControlsAxis Q3505-V Fixed Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and AudioPixel Counter Image264 Click Save to apply the new settingsCapture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Stream ProfilesImage Appearance Image CorrectionWhite Balance Wide Dynamic Range Exposure SettingsShutter & Gain Set Shutter toSelect an Aspect ratio and a Video stream resolution Iris adjustmentView Area Day/NightOverlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask When satisfied, click Enable iris to enable the irisFocus & Zoom Set Zoom and Focus Optical Zoom for MonitoringAudio Settings Audio ModesAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGatekeeper Guard TourControls AdvancedCamera Tampering DetectorsShock Detection Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesRecommended values 15% 60-90% 75-95%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q3505-V Fixed Dome Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemAdd Recipients Set Up Email RecipientsActions PTZ ControlCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddRecording List RecordingsContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 Bonjour StorageSD Card Mount and Unmount SD Card Network Share Ports & Devices Ports Port StatusSupport MaintenanceAccelerometer Support OverviewLogs & Reports System OverviewScripting File UploadPlain Config Reset to Factory Default SettingsUpgrade the Firmware TroubleshootingFirmware To upgrade the product’s firmware Check the FirmwareSymptoms, Possible Causes and Remedial Actions Setup Video & Audio Camera Settings Video and image problems, generalKey frames Motion Detection triggers unexpectedlyStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Audio Audio streaming Function/group SpecificationsAudio Audio inputInstallation aids Function/group Specifications Data streamingMaintenance General Casing PowerFunction/group Specifications Optional ConnectorsWarranty Function Pin SpecificationsMulticable sold separately Mm audio connectors stereo Tip Ring SleeveBalanced Microphone Cold Ground Microphone In/Line Line out mono GroundPerformance Considerations WiresRed Black + DC or ACM3.8