Listening to USB mass storage device/MP3 player (continued)
●This product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, the file will be automatically skipped. This will take a few seconds. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again.
●This product relates to USB mass storage devices and MP3 players. It may however face some irregularities due to various unforeseen reasons from some devices. Should this happen, turn off the unit and then turn it on again.
●The USB port is only intended for direct connection to a USB memory device without any cable.
●This unit only supports
●
●Playback order for MP3 files may differ depending on the writing software used during file download.
●Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps.
●For MP3/WMA files, please put “.MP3” “.WMA” extension. Files cannot be played back if there is no MP3/WMA extension.
●Playlists are not supported on this unit.
●This unit can display Folder Name or File Name up to 16 characters.
●Maximum total number of MP3/WMA files is 65280. Maximum total number of folders is 255 inclusive of root directory.
●Folders with non playable files are also counted.
●The display playback time may not be displayed correctly when playing back a variable bitrate file.
●The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode.
●WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back.
Listening to the radio
■Tuning
1Press the
2Press the FUNCTION button repeatedly to select FM ST (FM stereo) or FM Mono.
3Manual and Auto tuning to the desired station.
●Manual tuning:
Press the TUNING (
or 
) button on the remote control repeatedly to tune in to the desired station.
●Auto tuning:
When the TUNING (
or 
) button on the remote control or (
or 
) on the main unit is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Press the button again to stop the auto tuning.
Notes:
●When radio interference occurs, auto scan tuning may stop automatically at that point.
●Auto scan tuning will skip weak signal stations.
To receive an FM stereo transmission:
●Press the FUNCTION button to select FM ST (FM STEREO) mode and “ST” indicator will be displayed. “ 
” will appear when an FM broadcast is in stereo.
●If the FM reception is weak, press the FUNCTION button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer.
■Memorising a station
You can store 40 FM stations in memory and recall them at the push of a button. (Preset tuning)
1Perform steps 2 - 3 in “Tuning”.
2Press the MEMORY button.
3Within 5 seconds, press the PRESET (
or 
) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1.
4Press the MEMORY button to store that station in memory. If the “MEMORY” and preset number indicators disappear before the station is memorised, repeat the operation from step 2.
5Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased.
Note:
The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead become disconnected.
■To recall a memorised station
Press the PRESET (
or 
) button for less than 0.5 seconds to select the desired station.