Bosch Appliances FW5 Display Stamping, Camera name stamping, Time stamping, Display milliseconds

Camera Browser Interface Advanced General Settings en 35

7.4Display Stamping

Various overlays or stamps in the video image provide important supplementary information. These overlays can be enabled individually and arranged on the image in a clear manner.

7.4.1Camera name stamping

Select the position of the camera name overlay in the drop- down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information.

If the Custom option is selected, enter values in the X and Y position fields.

7.4.2Time stamping

Select the position of the time and date overlay in the drop- down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information.

If the Custom option is selected, enter values in the X and Y position fields.

7.4.3Display milliseconds

If necessary, display milliseconds for Time stamping. This information can be useful for recorded video images; however, it does increase the processor's computing time. Select Off if displaying milliseconds is not needed.

7.4.4Alarm mode stamping

Select On in the drop-down box for a text message to be displayed in the event of an alarm. It can be displayed at a position of choice using the Custom option, or it can be set to Off for no overlay information.

If the Custom option is selected, enter values in the X and Y position fields.

Bosch Security Systems Software manual AM18-Q0605 v5.0 2011.07