Control of a dome camera
Configured dome camera
If a dome camera is configured, an arrow will appear in its live image if the user moves the mouse (variable speed) over the live image. With the left mouse button, you can control the camera in the direction of the activated arrow.
e.g. to the left | e.g. up |
e.g. to the right | e.g. down |
A magnifying glass appears in the middle of the screen. If you see a + sign, this means that you are zooming in on the image. If you see a – sign, the camera angle is getting larger.
+Zoom in: reduce camera angle (zoom in)
–Zoom out: enlarge camera angle (zoom out)
Note
Depending where you place the mouse cursor you operate with a variable speed.
By clicking the right mouse button on the live image, you activate the following menu:
–Dome camera control
–Presets saved
–Macros saved
Dome camera control
Here you can set the focus (sharp/ blurred) and aperture (open / close).
Presets saved
In the configuration, you can call up set camera positions here.
Macros saved
Call up saved camera commands. (Start/end macros).
Note
Presets and macros are to be configured in the set up in advance.
Please also use the online help
BOSCH Security Systems GmbH | – 10 – | A1 02.03 |