Bosch Appliances VG4-100 Accessing and Navigating Menus, Menu Keyboard and Monitor Jack

6 en Advanced SetupAutoDome Modular Camera System

5.1 Accessing and Navigating Menus

There are five (5) keys used for navigating through the various menus. To access the setup menus, press the center Select key to open and display the Main menu. Use the four direc- tional keys to navigate through the menus.

UP

LEFT RIGHT

Menu Keyboard

Menu Keyboard

Monitor Jack

Monitor Jack

Fig. 5.1 Menu Keyboard and Monitor Jack

Use the menu keys to perform the following:

–To access the Main menu or to select a sub-menu item, press the center Menu Select key.

–To open the Install menu press the Menu Select key for approximately 1.5 seconds.

–To scroll up or down a menu press the Up or Down keys.

–To move through options or to set parameters, press the Left or Right keys.

NOTICE! To restore a selected menu item to its factory default, quickly press the Menu

The VG4-100 Series also supports a variety of remote methods to make camera adjustments, including the following:

–A Universal keyboard using Bilinx over coax or UTP. For example, using a Bosch DiBos 8, a Bilinx capable DIVAR, or an Allegiant system.

–A PC running the optional Bosch Configuration Tool for Imaging Devices (CTFID) software with a USB Bilinx adapter (Part No. VP-CFGSFT).

–A PC connected to a TCP/IP network with an optional AutoDome IP module installed.

NOTICE! To prevent unauthorized changes to the camera settings, the camera menu buttons

i can be disabled using Bilinx communication through the CTFID software. Select the OnLine Config button, then select the Miscellaneous branch and set Camera Buttons to Disable.