English, System Considerations | Axis Communications AXIS A1001

(0.78 in), Axis part number: 38118, manufacturers: Rayovac, Panasonic, Renata.)

–Users shall not replace the battery. If the battery needs replacing, a factory trained service professional shall contact Axis support at www.axis.com/techsup for assistance.

–Used batteries shall be disposed of according to local laws and regulations, which may vary from state to state. Waste BR lithium cells are neither listed nor exempted from the USEPA hazardous waste regulations. Waste BR lithium batteries can be considered reactive hazardous waste if there is a significant amount of unreacted, or unconsumed lithium remaining. For information about how to dispose of used lithium batteries, contact your local authority for waste disposal.

Specifications

•Operating Conditions

–Temperatures beyond 0 °C to 49 °C (32 °F to 120 °F) has not been verified as part of UL 294.

•Wire Area

–UL Listed or R/C AWM wires that have an conductor gauge range of AWG 22–14 shall be used.

–The minimum conductor gauge for connection between the power sourcing equipment (PSE) or power injector and the powered device (PD) is 26 AWG.

•Connectors

–This product is not intended for outside wiring as covered by Article 800 in the National Electrical Code, NFPA 70.

–Power Connector – For UL security applications, the product shall be powered by a UL 294 Listed or UL 603 Listed Class 2 low-voltage power limited power supply that is capable of 4 hours of standby power.

–Network Connector – Power over Ethernet (PoE) shall be supplied by a UL 294 Listed Class 2 power limited injector that provides 44–57 V DC, 15.4 W and 4 hours of standby power. Compliance with IEEE 802.3 (at or af) specifications has not been verified as part of UL 294/B.

–Tampering Alarm Pin Header – To comply with UL 294/7.2.1 (Enclosure), the tampering alarm shall be connected to a sound alarm.

•System Considerations

–The Axis product, whether it is a standalone door controller or a system of door controllers, shall not impair the intended operation of the panic hardware used in conjunction with it.

•Wall and Ceiling Mount

–If using a junction box to mount the Axis product, the junction box shall be UL Listed.

•Assign an IP Address

–The functionality of AXIS Camera Management, see page 36, has not been evaluated by UL.

•Maintenance Instructions

–For maintenance instructions (some steps require access to the product’s webpages), see page 40. For information about how to configure the Axis product using the product’s webpages (AXIS Entry Manager), see the User Manual.

English

System Considerations

The Axis product shall be installed within the secured area. The Axis product, whether it is a standalone door controller or a system of door controllers, shall not limit or waken the intended use of the devices connected to it.

The Axis product should be installed on a wall (preferred) or a ceiling, with or without a junction box. It can also be installed on a DIN rail.

Safety Information

Read through this Installation Guide carefully before installing the product. Keep the Installation

Guide for future reference.

Hazard Levels

Read through this Installation Guide carefully before installing the Axis product. Keep the Installation Guide for further reference.

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

Indicates a situation which, if not avoided, could result in damage to property.

Other Message Levels

Indicates significant information which is essential for the product to function correctly.

Indicates useful information which helps in getting the most out of the product.

Safety Instructions

The Axis product shall be installed by a trained professional.

•Never mount the Axis product while power is applied to the product. Always apply power at the end of the installation.

•Disconnect power before connecting any wires to the Axis product. Never make connections while power is applied to the product..

•The Axis product shall be used in compliance with local laws and regulations.

•To use the Axis product outdoors, or in similar environments, it shall be installed in an approved outdoor housing.

•Store the Axis product in a dry and ventilated environment.

•Avoid exposing the Axis product to vibration, shocks or heavy pressure.

•Do not install the product on unstable brackets, surfaces or walls.

•Use only applicable tools when installing the Axis product. Excessive force could cause damage to the product.

•Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.

•Use only accessories that comply with technical

AXIS A1001 specifications

The Axis Communications AXIS A1001 is a state-of-the-art IP-based door controller designed to enhance security and access management in various environments. This device is specifically tailored for organizations looking for a robust solution for controlling access to their facilities while ensuring the safety of personnel and assets.

One of the standout features of the AXIS A1001 is its ability to seamlessly integrate with existing network infrastructures. It supports Power over Ethernet (PoE), which simplifies installation by allowing both power and data to be transmitted through a single cable. This reduces the need for additional electrical wiring, making installation quicker and more cost-effective.

Equipped with a variety of connectivity options, the AXIS A1001 facilitates integration with third-party devices, such as video surveillance systems and intrusion detection systems. This interoperability allows organizations to create a comprehensive security ecosystem that responds to potential threats in real-time.

The AXIS A1001 supports two modes of operation: a standalone mode for smaller applications and a network mode for more extensive and complex access control systems. In standalone mode, the device can be configured and managed locally, while network mode allows for centralized control from a server or cloud-based platform. This flexibility makes the AXIS A1001 suitable for a range of scenarios, from small offices to large enterprises.

Another significant feature is its compatibility with a wide range of credential options, including RFID readers, keypads, and mobile access solutions. This enables organizations to customize their access control systems according to their specific needs. Additionally, the AXIS A1001 is designed to support both entry and exit control, allowing for efficient management of the flow of individuals in and out of premises.

In terms of security, the AXIS A1001 is equipped with advanced encryption standards to protect data transmission and prevent unauthorized access. The device also features tamper detection, which alerts administrators in case of potential tampering with the hardware.

Overall, the Axis Communications AXIS A1001 combines cutting-edge technology with user-friendly features, making it a versatile choice for any organization looking to boost its access control measures and enhance overall security. With its robust performance and integration capabilities, the AXIS A1001 stands out as a reliable solution for today's demanding security challenges.