6 en Installing a Recessed Mount | AutoDome Junior |
|
|
4.Align holes of mounting plate (supplied with dome) with mounting bracket and attach with screws. Ensure that both the crescent shape of the mounting plate and the crescent shape of the mounting bracket are aligned.
Figure 1.2 Attach Mounting Plate to Mounting Bracket
1 | Mounting Bracket |
2 | Mounting Plate |
3 | Clamping Plate |
4 | Crescent Shape |
5 | Clamp Drive Screw |
5.Loosen the two clamp drive screws (item 5, above) so that the clamping plates move freely.
6.Insert mount through the hole in the ceiling. Slide clamps out and down so that the ceiling/drywall is captured in between the clamps and the bracket flange. The ceiling/ drywall must have a maximum thickness of 41.7 mm
(1.64 in.) and an minimum thickness of 12.7 mm (0.50 in.).
F.01U.168.034 3.0 2010.12 | Installation Manual | Bosch Security Systems, Inc. |