30 en Troubleshooting | Integrated IR Dome Camera |
6Troubleshooting
6.1Troubleshooting
Before sending the camera out for repair, check the items below. If the problem persists after checking these items, contact your service center.
-If no image appears, verify that:
–The coaxial cable is attached securely.
–The power and voltage are normal.
–The iris of the lens inside the camera was adjusted correctly (with the level volume).
–There is adequate illumination.
-If the image is unclear, verify that:
– The lens is in focus.
– The lens is not dirty. Dirt or fingerprints on the lens can adversely affect the images. Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning paper and cleaning fluid (available commercially).
– The monitor is adjusted correctly.
TBD 2.0 2010.12 | Installation Manual | Bosch Security Systems, Inc. |