Bosch Appliances 550 user manual Mounting the Camera, Screw removal

Page 19

MIC Series 550 Camera

Installation en 19

 

 

To reverse the rain shield, follow these steps:

1.Remove the four (4) M3 x 6 screws that hold the rain shield to the face of the camera. Two screws are on the left of the rain shield; two screws are on the right of the rain shield.

Figure 5.6 Screw removal

2.Reverse the rain shield.

3.Reattach the rain shield to the camera face.

 

Figure 5.7 Inverted rain shield installed on camera

5.4

Mounting the Camera

 

 

 

NOTICE!

 

Installation should be made by qualified service personnel and conform to the National

 

Electrical Code and applicable local codes. Ensure a strong safety chain is used to secure the

 

camera to prevent any danger of dropping the product during installation.

 

 

To mount a MIC Series camera, follow these steps:

1.Identify a secure location for the mount (supplied separately) and for the camera. Locate the mounting position so that the camera cannot be interfered with either intentionally or accidentally.

2.Ensure that the mounting surface is capable of supporting the combined weight of the camera and mounting hardware under all expected conditions of load, vibration, and temperature.

3.Fit the mounting brackets securely, observing all appropriate safety precautions and local building regulations.

4.Carefully lift the camera to the mounting point.

5.Attach the security attachment point to a safety chain (not supplied).

6.Attach the safety chain to a secure part of your mounting structure.

Bosch Security Systems, Inc.

User Manual

F.01U.239.454 3.0 2012.09

Image 19
Contents MIC Series 550 Camera Page Table of Contents On-Screen Display OSD Menus Pelco Protocol Common User Commands unlockedAdvanced Features On-Screen Display OSD Menus Bosch ProtocolKeyboard Commands by Number Legal Information Conventions Safety Precautions in this ManualPreface About this ManualImportant Safety Instructions 2SafetyCoax grounding 2Important NoticesMIC Series 550 Camera Safety en FCC & Ices Information FCC and Ices ComplianceInformations FCC et Ices Aspects of this product Bosch NoticesWashington, DC 20402, États-Unis, sous la référence n DisclaimerUSA Customer Support and ServiceAdditional Tools Required Parts ListUnpacking Additional Products RequiredMIC camera mounting positions Inverted, Upright, and Canted Installation OverviewNumber Description Typical Mounting ArrangementsMounting Positions Overview of Installation Steps 5Installation2Canting the Camera Pan body fixing screws Adjusting the Rain Shield for Inverted OperationScrew removal Mounting the CameraLightning Protection Composite Cable Color-coding 6Electrical ConnectionsModel Number Length Cable Type Maximum Distance Alarm Inputs and OutputsNon-IR with 8-input alarm card Non-IR without alarm card 3VideoEstablishing Control of the Camera via RS-485 Protocol Establishing Control of the Camera via Biphase ProtocolGetting Started Establishing Control of the CameraNavigating the On-Screen Display OSD Menus Powering OnWire Type Wire shielded twisted pair Controlling the CameraBasic Keyboard Operation 3Keyboard Commands, Bosch ProtocolLCD Special Preset Commands, Pelco Protocol Keyboard Commands, Pelco ProtocolPreset To set an address for a camera without an address Setting the Camera Address via FastAddressFastAddress, Bosch Protocol 2FastAddress, Pelco ProtocolsSpecial Passwords Setting PasswordsSetting Passwords, Bosch Protocol Configuring the Camera for Inverted Operation 7On-Screen Display OSD Menus Bosch Protocol Camera Setup MenuGain Control White BalOutdoor W.B. Optimizes Sodium Lamp AutoWDR OFFAuto Auto Iris Lens Setup MenuAuto Focus SpotFast PTZ Setup MenuNormal Display Setup MenuOSD MomentaryCommunication Setup Menu Alarm Setup None SetupOutputs Setup Submenu InputsRule Setup Rule Language Menu Diagnostics MenuBist High Alarm Status Events Menu Description Options ExitAlarm Input Alarm OutputOn-Screen Display OSD Menus Pelco Protocol Command Lock lockedOutdoor Camera SetupPelco menu Bosch menu Setup Menu Bosch Menu lockedWiper PTZ Setup unlockedPresets, limit stops, recording, and AutoPivot Recording Autopivot = Factory Setting Focus / Iris SelectOther Menus AUX Setup MenuReset All Memory Menu Description Default Setting Restore All Settings3Specifying a Shot or a Sector Title Common User Commands unlockedSetting AutoPan Mode 2Setting Preset ShotsProgramming the Inactivity Operation 4Configuring Preposition Tours6Recording Tours Using the Wiper/Washer Bosch ProtocolFunctions are mapped as follows in MIC550 Remapping Aux Commands Pelco Protocol, firmware versionUsing the Washer/Wiper Pelco Protocol HigherMenu Night IR Focus Mode Illuminator Correction Model Configuring Settings for IR IlluminationResults 10.1.2 Alarm Rule Examples Advanced Features10.1 Alarm Rules 10.1.1 Controlling Alarm Rules10.2 Privacy Masking Example 2 Advanced Alarm Rule10.5 Azimuth, Elevation, and Compass Directions 10.5.1 Setting the Azimuth Zero Point10.3 Image Stabilization 10.4 Pre-position Tour180 / -45 S 10.5.2 Displaying Azimuth, Elevation, and Compass HeadingsZone Title Menu Enters Zone Title menu. Refer to Keyboard Commands by NumberKeyboard Commands By Number Bosch Protocol Alarm Status Enters Alarm Status menuRefer to .5 Azimuth, Elevation, Compass Directions, Keyboard User Action Description Command Keyboard Commands By Number Pelco ProtocolPreset Command Description Number Preset Commands Forward Vision ProtocolMIC Series 550 Camera en Preset Command Description Number Page Bosch Security Systems, Inc

550 specifications

Bosch Appliances has long been recognized for its commitment to quality and innovative solutions, and the Bosch Appliances 550 series exemplifies this reputation. The 550 series combines sleek design with advanced technology to enhance the user's kitchen experience.

One of the standout features of the Bosch 550 series is its remarkable efficiency. Designed with energy-saving technologies, these appliances boast an impressive Energy Star rating, significantly reducing power consumption without compromising performance. This not only leads to substantial savings on utility bills but also contributes to a more sustainable lifestyle.

The 550 series includes various appliances such as refrigerators, dishwashers, ovens, and cooktops, each meticulously designed to fit seamlessly into any kitchen design. The appliances are equipped with a minimalist aesthetic, featuring clean lines and a modern finish that complements both traditional and contemporary interiors.

In terms of cooking performance, the Bosch 550 ovens incorporate advanced convection technology. This ensures even baking results by circulating hot air throughout the oven. Additionally, the True European Convection for even baking results makes these ovens ideal for baking enthusiasts. Furthermore, the ovens come with a self-cleaning feature, saving homeowners time and effort in maintaining their appliance.

Dishwashers in the 550 series feature Bosch’s renowned Quiet Design technology, ensuring minimal noise during operation. This is particularly beneficial for open-concept living spaces where noise can be disruptive. With a range of wash cycles and options, including a rinse-only cycle and a sanitize cycle, these dishwashers are designed to cater to various cleaning needs.

Smart technology is another prominent characteristic of the Bosch 550 appliances. Many models in the series come with Wi-Fi connectivity, allowing users to control their appliances remotely through a smartphone app. This feature enhances convenience, enabling users to monitor cooking progress or receive maintenance alerts.

The Bosch Appliances 550 series also prioritizes user-friendly controls. Intuitive touch controls and digital displays streamline the process of selecting functions, resulting in a smoother experience in the kitchen.

In summary, Bosch Appliances 550 series is a perfect blend of efficiency, advanced technology, and sleek design. With features like energy efficiency, smart connectivity, and user-friendly controls, this series represents Bosch’s dedication to elevating the modern kitchen experience while maintaining brand integrity and quality.