Bosch Appliances 550 user manual Basic Keyboard Operation, 3Keyboard Commands, Bosch Protocol, Lcd

MIC Series 550 CameraGetting Started en 25

To navigate the OSD menus:

1. Use the joystick to highlight a menu item.

2. Press either the Focus or the Iris key to open a menu item.

3. Follow the on-screen instructions.

Note: To select the Exit Menu item from anywhere in the current menu, use the Zoom command.

6.3.2	Basic Keyboard Operation
		The following tables summarize the basic operations for a standard keyboard and the
		functions available to control a MIC-550 camera.
		Typical Keyboard	Usage
		Features
		Function Keys	Selects a specific control setting.
		Number Keys	Inputs a number from 0 to 9.
		Camera Key	Selects a camera number.
		Enter Key	Inputs a selection.
		Focus Key	Sets the lens focus or makes a menu selection in OSD mode.
		Iris Key	Sets the lens iris setting or makes a menu selection in OSD mode.
		Key LEDs	Indicates an active key.
		LCD	Displays the current status.
		Joystick	Controls the pan/tilt/zoom (PTZ) functions of the camera.
		Table 6.1 Typical Keyboard Functions
		Camera Operation		How to control
		To Pan Side to Side		Move the joystick left or right.
		To Tilt Up and Down		Move the joystick forward and back.
		To Zoom In		Twist the joystick clockwise.
		To Zoom Out		Twist the joystick counterclockwise.
		Table 6.2 Typical Keyboard Controls for a MIC-550 Camera

6.3.3Keyboard Commands, Bosch Protocol

Keyboard control commands are composed of a sequence of three (3) inputs with the following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.

– Depending on the type of keyboard, the control function keys are labeled: ON or AUX ON

OFF or AUX OFF

SET or SET SHOT

SHOT or SHOW SHOT

NOTICE!

The convention used for control key commands in this manual is ON, OFF, SET, and SHOT. Refer to your keyboard manual for the key naming conventions.

–Command numbers range from 1 to 999. See Section A Keyboard Commands by Number, page 59 for a complete list of keyboard commands.

–The Enter key can also be labeled with the ∞ symbol.

For example, the keyboard command to make the MIC-550 pan 360º continuously is:

ON-1-ENTER(Press the ON key, then press the number 1 key, and then press ENTER.)

Bosch Security Systems, Inc. User Manual F.01U.239.454 3.0 2012.09