
Mounting the camera when you can not make a hole for the cables on the ceiling/wall.
When you can not make a hole for the cables on the ceiling/wall where the camera to be installed, proceed as follows;
1.When you can not make a hole in the ceiling/wall to pass the cables through, cut and remove the plas- tic part to make the concave for cables.
2.Open the panel cover by using a tool, such as a screwdriver (−).
3.Detach the video output connector cable and the DC power input connector cable from the camera.
4.Pass the cables through the concave, and attach the cables to the camera again.