Panasonic wv-cp500 operating instructions 10s

Page 18

Perform the settings relating to the detection of appearance/disappearance of stationary objects

Perform the settings relating to the detection of appearance/disappearance of stationary objects as follows. Up to 4 appearanc- es/disappearances of stationary objects can be simultaneously detected. However, use of the scene change detection function decreases the maximum simultaneous detectable appearances/disappearances of stationary objects to 3.

Follow the procedure below.

"CAMERA SETUP" screen

"i-VMD SETUP" screen

"OBJECT" screen

"SENSITIVITY" screen

 

**CAMERA SETUP**

**i-VMD SETUP**(1)

**OBJECT DET**(1)

**SENSITIVITY**(1)

SCENE1

 

MOTION DET

 

 

REMOVAL AND LEFT BEHIND

MIN SIZE

OFF

 

 

ALC/ELC

ALC

OBJECT DET

ON

 

 

 

 

 

 

 

 

SHUTTER

OFF

SCENE CHANGE

OFF

 

DURATION TIME

10s

 

 

 

 

AGC

ON(HIGH)

INDICATOR

OFF

AREA

ALL

 

 

 

 

SENS UP

OFF

SENSITIVITY

 

 

 

 

 

 

WHITE BAL

ATW1

ALARM

CONT

 

 

 

 

 

 

 

DNR

HIGH

 

 

 

 

 

 

 

 

 

 

BW MODE

AUTO1

 

 

 

 

 

 

 

 

 

 

i-VMD

 

 

 

 

 

 

 

 

 

 

 

 

RET TOP END

 

RET TOP END

 

 

RET TOP END

 

RET TOP END

 

 

Step 1

Move the cursor to "i-VMD" and press the setting button.

The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "OBJECT DET" and press the setting button.

The "OBJECT DET" screen appears.

Step 3

Move the cursor to "DURATION TIME" and select the wait time of appearance/disappearance of stationary objects from the fol- lowing.

10 s (default)/20 s/30 s/40 s

Step 4

Move the cursor to "AREA" and select the area for which the detection of appearance/disappearance of stationary objects is to be set.

ALL (default): All areas will be set as the detection area.

SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer to pages 18 for how to configure the settings.

Step 5

Move the cursor to "SENSITIVITY" and press the setting button.

The "SENSITIVITY" screen appears.

Step 6

Move the cursor to "MIN SIZE" and select the minimum size of objects detected from the following: The size options will be dis- played in a green frame in the center of the screen. In "OFF" position, any object will be detected regardless of its size.

Perform the setup while viewing the detection result displayed on the screen. OFF (default)/SMALL/MEDIUM/LARGE

Note:

The detection areas set in step 4 will be displayed as a white frame on the "SENSITIVITY" screen.

When appearance/disappearance of a stationary object is detected, a red frame will be displayed on the "SENSITIVITY" screen.

18

Image 18
Contents WV-CP504 Preface Trademarks and registered trademarksContents Setup item Description About the setup menusSetup menu list ReferenceBasic operation StepScreen transition diagram Camera ID screenDisplay positioning screen Camera title setting Camera IDTop screen Camera ID screen Character entryScreen when SCENE1 is selected Screen when SCENE2 is selectedRegister a scene file SCENE1/SCENE2 Area setting screen SUPER-D5 settingCamera Setup screen ALC Cont screen Light quantity control method selection ALC/ELCWhen using the SUPER-D5 function Electronic shutter setting Shutter When not using the SUPER-D5 functionMask setting screen Gain control setting AGC Electronic sensitivity enhancement setting Sens UPWhite balance setting White BAL VMD Manual fine adjustment of white balance Digital noise reduction function setting DNRBlack-and-white mode setting BW Mode Camera Setup screenPress the setting button → The BW Mode screen appears VMD setting i-VMD Perform the settings relating to the motion detectionSet the detection sensitivity Detect motion of objectsDetect objects that move into the specified direction Set the minimum size of objects detected10s Set the detection areas Motion DET screen Object DET screenSetting of scene change detection Configure frame displayCamera Setup screen VMD Setup screen Configure alarm notification Follow the procedure below System Setup screen Sync screen Camera system setting System SetupSetting of the power supply synchronization LL mode Synchronization method selection SyncAlarm input/output terminal setting Alarm IN/OUT Configure the alarm input terminal settingsSystem Setup screen Alarm IN/OUT screen Privacy zone setting Privacy Zone System Setup screen Zone setting screenImage stabilizer setting Stabilizer Electronic zoom setting EL-ZOOM Pan/tilt setting screenBack focus setting BACK-FOCUS Setup Back focus adjustmentABF Auto Aperture level adjustment AP Gain Special menu setting Special SetupChroma level adjustment Chroma Gain Pedestal level adjustment PedestalFlaw compensation PIX OFF PIX OFF screenPixel compensation positioning screen Communication setting Communication Default resetting Camera ResetSerial number viewing SER.NO Language selection Language Setup System controller operation Setting contents Shortcut operationSystem controller operation Setting contents Panasonic System Solutions Company Panasonic Canada IncPanasonic Sales Company Panasonic Puerto Rico, Inc
Related manuals
Manual 32 pages 9.29 Kb Manual 35 pages 2.52 Kb

wv-cp500 specifications

The Panasonic WV-CP500 and WV-CP504 are advanced surveillance cameras renowned for their reliability, image quality, and versatile features. These cameras are part of Panasonic's comprehensive line of surveillance solutions, designed to meet the demands of various commercial and industrial applications.

Both models are equipped with a high-resolution 1/3-inch CCD image sensor, capable of delivering stunning video quality at resolutions up to 540 TV lines for the WV-CP500 and 480 TV lines for the WV-CP504. This high resolution ensures that users can capture clear, detailed images, making it easier to identify subjects and monitor activities in real time.

One of the standout features of the WV-CP500 and WV-CP504 is their exceptional low-light performance. The cameras possess a minimum illumination capability of just 0.5 lux, which allows for effective monitoring even in dimly lit environments. This is particularly advantageous for security applications in areas with varying light conditions, such as parking lots and retail stores.

Both models also incorporate advanced technologies such as Adaptive Black Stretch and Automatic Gain Control (AGC). Adaptive Black Stretch enhances visibility in dark areas without affecting the bright areas of an image, allowing for a more comprehensive view of the scene. AGC helps ensure that the camera maintains optimal brightness levels, enhancing the image quality in changing lighting conditions.

In terms of practical features, the WV-CP500 and WV-CP504 offer multiple lens options, allowing users to customize their surveillance setup according to specific needs. The cameras support various mounting types, including ceiling and wall installations, making them versatile enough for a wide range of settings.

Panasonic has prioritized durability with these models, and both are designed to operate effectively in challenging environments. They feature robust housings that can withstand dust and moisture, which is critical in outdoor applications or industrial settings. The cameras are also equipped with advanced digital signal processing, which optimizes the image for superior clarity and detail.

Furthermore, the WV-CP500 and WV-CP504 are compatible with various Panasonic video management systems, enabling seamless integration into existing surveillance setups. This compatibility allows for efficient monitoring and management of multiple camera feeds, providing users with a comprehensive security solution.

In summary, the Panasonic WV-CP500 and WV-CP504 surveillance cameras offer excellent image quality, versatile mounting options, and robust durability. Their innovative features and technologies make them ideal choices for businesses and organizations looking to enhance security and monitor their premises effectively.