Panasonic wv-cp500 operating instructions Electronic zoom setting EL-ZOOM, Pan/tilt setting screen

14. Electronic zoom setting [EL-ZOOM]

Select "On" or "Off" to determine whether or not to use the electronic zoom.

When "ON" is selected, the zoom factor and the panning/tilting settings can be configured.

ON: Uses the electronic zoom.

OFF (default): Does not use the electronic zoom.

Follow the procedure below.

"SYSTEM SETUP" screen		EL-zoom setting screen			Zoom setting screen			Pan/tilt setting screen
**SYSTEM SETUP**		**EL-ZOOM**				**EL-ZOOM**		**EL-ZOOM**
SYNC	INT
ALARM IN/OUT		ZOOM					PUSH SW	ZOOM	PUSH SW
			PUSH	SW	ZOOM
PRIVACY ZONE	OFF	PAN/TILT	PUSH	SW	PAN/TILT		PUSH SW	PAN/TILT	PUSH SW
STABILIZER	OFF					U ZOOM D		U TILT D/L PAN R
EL-ZOOM	ON
RET TOP END		RET TOP END			RET TOP END			RET TOP END

Step 1

Move the cursor to "EL-ZOOM", select "ON" and press the setting button.

→The "EL-ZOOM" screen will be displayed.

Step 2

Move the cursor to "PUSH SW" of "ZOOM" and press the setting button.

→The zoom setting screen appears.

Step 3

Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the up or down button.

Note:

• When the zoom factor is incremented, resolution will be deteriorated.

Step 4

Move the cursor to "PUSH SW" of "PAN/TILT" and press the setting button.

→The pan/tilt setting screen appears.

Step 5

Use the up, down, right, and left buttons to determine the image position and press the setting button. The position can be changed in the range of zoom factor set in the "EL-ZOOM" screen.

Note:

•To reset to the default, hold down the right and left buttons simultaneously for approx. 2 seconds while the zoom setting screen or pan/tilt setting screen is displayed.

26