External synchronization switch
The settings of the alarm input/output are configured on the SETUP menu. Refer to the network operating instructions (PDF) for further information.
Important:
• Be sure to turn off the power of each device before connection.
Alarm output
Input specification: Open collector out- put (max. voltage: 16 V DC)
Off: Internally pulled up 2 V to 4 V DC
On: Output voltage 1 V DC or less (max. drive current: 100 mA)
Functions: Alarm output
WV-CP500
VIDEO OUT
Alarm input
Input specification:
Off: Open or 3 to 5 V DC
On: Make contact with GND (required drive current: 0.2 mA or more)
Functions: Alarm input
VMD enabling input
Color/BW switching input
Scene file switching input
*When an external device is connected, exercise care to avoid exceeding the rating.
*Applicable wire: 22
Strip the end 9 mm to 10 mm {11/32" to 13/32"} of the wire and | Stripped | |||
insert it. |
9 mm - 10 mm
{11/32" to 13/32"}
18