Panasonic WV-CP504, wv-cp500 manual Turn on the power, AC 24 DC 12

Page 19
To 24 V AC/12 V DC power supply
Power cord plug (accessory)
Stripped
Approx. 3 mm - 7 mm {1/8" to 1/4"}
ALARM IN
(UP)

nTurn on the power.

WV-CP500

The included power cord is connected to this power connector.

Connect between the power connector on the rear side of the camera and a plug socket with the supplied power cord.

Power cord (accessory)

120 V AC 60 Hz

WV-CP504

Important:

The power supply of 24 V AC/12 V DC shall be insulated against 120 V AC.

The power supply is automatically selected either 24 V AC or 12 V DC. No setting is required with this camera.

qLoosen the screw of the power cord plug (accessory).

wConnect the power supply (option) of 24 V AC or 12 V DC to the power cord plug.

Strip the end of the wire by 3 mm to 7 mm {1/8" to 1/4"}, and twist the stripped part of the wire sufficiently to avoid short circuit.

Specification of cable (wire)

AWG #16 - #28, Single core, twisted

*Check whether the stripped part of the wire is not exposed and is securely con- nected.

<Ratings>

AC 24 V

DC 12 V

2-N

@ (GND)

GND

NC

1-L

!

ALARM OUT POWER

GND

ALARM IN

VIDEO OUT

120V ~ 60Hz

ALARM OUT GND

VIDEO OUT

POWER

24V

~ IN

NEAR

BF/MENU

FAR

1-L

2-N

(LEFT)

(SET)

(RIGHT)

 

GND

 

 

 

 

 

 

 

(DOWN)

12V IN

NC

e Tighten the screw of the power cord plug. r Connect the power cord plug to the AC/DC

power terminal on the rear side of the camera.

* Make sure that the power cord plug is inserted fully into the AC/DC power supply terminal.

19

Image 19
Contents WV-CP504 This apparatus must be earthed Important safety instructions Limitation of liability Disclaimer of warrantyAuto back focus function ABF equipped Introduction of newly developed high-resolution CCDPreface Introduction of SUPER-D5 super dynamic functionTrademarks and registered trademarks Contents Precautions Side view WV-CP500 Major operating controls and their functionsRear view WV-CP500 External terminal Power connector only for WV-CP500 ALC lens connectorVideo output connector Power indicatorPrecautions for installation Power cord only for WV-CP500 Rotate the lens option clockwise slowly to mount the lens Installation and connectionLens type Model Nos Mount the camera on the camera mount Option to an installation position,Installation sample on a ceiling Secure the camera mount bracketPage Coaxial cables WV-CP500 Functions Alarm inputWV-CP504 Turn on the powerAC 24 DC 12 To use a fixed-focal lens Adjust the focusHow to adjust the back focus To use the varifocal lens/zoom lensPage Setup item Description Setup menuLanguage Step Basic operationRET TOP END Screen transition diagram Cause/solution TroubleshootingReference Pages General SpecificationsCamera ALC/ALC+/ELC Standard accessoriesPage Panasonic Canada Inc Panasonic System Solutions CompanyPanasonic Sales Company Panasonic Puerto Rico, Inc
Related manuals
Manual 35 pages 2.52 Kb Manual 35 pages 63.6 Kb

WV-CP504, wv-cp500 specifications

The Panasonic WV-CP500 and WV-CP504 are advanced surveillance cameras renowned for their reliability, image quality, and versatile features. These cameras are part of Panasonic's comprehensive line of surveillance solutions, designed to meet the demands of various commercial and industrial applications.

Both models are equipped with a high-resolution 1/3-inch CCD image sensor, capable of delivering stunning video quality at resolutions up to 540 TV lines for the WV-CP500 and 480 TV lines for the WV-CP504. This high resolution ensures that users can capture clear, detailed images, making it easier to identify subjects and monitor activities in real time.

One of the standout features of the WV-CP500 and WV-CP504 is their exceptional low-light performance. The cameras possess a minimum illumination capability of just 0.5 lux, which allows for effective monitoring even in dimly lit environments. This is particularly advantageous for security applications in areas with varying light conditions, such as parking lots and retail stores.

Both models also incorporate advanced technologies such as Adaptive Black Stretch and Automatic Gain Control (AGC). Adaptive Black Stretch enhances visibility in dark areas without affecting the bright areas of an image, allowing for a more comprehensive view of the scene. AGC helps ensure that the camera maintains optimal brightness levels, enhancing the image quality in changing lighting conditions.

In terms of practical features, the WV-CP500 and WV-CP504 offer multiple lens options, allowing users to customize their surveillance setup according to specific needs. The cameras support various mounting types, including ceiling and wall installations, making them versatile enough for a wide range of settings.

Panasonic has prioritized durability with these models, and both are designed to operate effectively in challenging environments. They feature robust housings that can withstand dust and moisture, which is critical in outdoor applications or industrial settings. The cameras are also equipped with advanced digital signal processing, which optimizes the image for superior clarity and detail.

Furthermore, the WV-CP500 and WV-CP504 are compatible with various Panasonic video management systems, enabling seamless integration into existing surveillance setups. This compatibility allows for efficient monitoring and management of multiple camera feeds, providing users with a comprehensive security solution.

In summary, the Panasonic WV-CP500 and WV-CP504 surveillance cameras offer excellent image quality, versatile mounting options, and robust durability. Their innovative features and technologies make them ideal choices for businesses and organizations looking to enhance security and monitor their premises effectively.