Features, Preface | Panasonic WV-CP474H instruction

(Lens: Option)

Color CCTV Camera

Operating Instructions

Model No. WV-CP474H

FEATURES

1.	The following functions are built in.
	(1)	Auto Light Control (ALC)/Electronic Light Control (ELC)
	(2)	The SUPER-D2function eliminates interference by strong background lighting
		which makes the camera picture dark, such as a spotlight.
		Dynamic range of 46 dB.
	(3)	Internal Line-locked Multiplex Vertical (VD2) Sync.
	(4)	Auto/Manual White Balance Function
	(5)	Electronic Shutter Function
2.	Signal-to-noise ratio of 50 dB (Equivalent to AGC Off)
3.	Minimum Illumination of 0.8 lx (0.08 foot-candle) at color mode, 0.1 lx (0.01 foot-candle)
	at black and white mode with F1.4 lens.
4.	480 lines of horizontal resolution
5.	High quality picture:
	(a) 2H type vertical enhancer for greater picture sharpness
	(b) Chroma averaging circuit for better color signal-to-noise ratio
	(c) Minimum of aliasing on fine objects
	(d)	Expanded dynamic range by use of knee circuit
	(e) Highlight aperture correction for greater picture detail of bright objects

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

N1002-0

3TR001320AAA

Printed in Japan

N 19

For U.S.A

NOTE: This equipment has been tested and

found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC

CAUTION

Rules. These limits are designed to provide

reasonable protection against harmful interfer-

RISK OF ELECTRIC

ence

when the equipment is

operated in a

SHOCK DO NOT OPEN

commercial environment. This equipment gen-

erates, uses, and can radiate radio frequency

energy and, if not installed and used in accor-

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

dance with the instruction manual, may cause

DO NOT REMOVE COVER (OR BACK).

harmful interference to radio communications.

Operation of this equipment

in a residential

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

area is likely to cause harmful interference in

6.	Ability to shoot indoor scenes with fixed iris lens by use of Electronic Light Control (ELC)
	function.
7.	Selectable electronic sensitivity enhancing modes including AUTO, MANUAL and OFF
8.	Built-in Digital Motion Detector
9.	Auto black-and-white mode enables the camera to switch between color and black-
	and-white picture in response to light input.

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

VICING TO QUALIFIED SERVICE PERSONNEL.		which case the user will be required to correct
		the interference at his own expense.
		FCC Caution: To	assure	continued compli-
	The lightning flash with arrow-
		ance, (example - use only shielded interface
	head symbol, within an equilat-
		cables when connecting		to computer or
	eral triangle, is intended to
		peripheral devices). Any changes or modifica-
	alert the user to the presence
		tions not expressly approved by the party
	of uninsulated "dangerous volt-	responsible for compliance could void the
	age" within the product's enclo-	user’s authority to operate this equipment.
SA 1965	sure that may be of sufficient
	magnitude to constitute a risk
		The serial number of this product may be found
	of electric shock to persons.
	The exclamation point within	on the top of the unit.
		You should note the serial number of this unit
	an equilateral triangle is intend-	in the space provided and retain this instruction
	ed to alert the user to the pres-	as a permanent record of your purchase to aid
	ence of important operating	identification in the event of theft.
	and maintenance (servicing)	Model No.	WV-CP474H
	instructions in the literature

w e

y uo

Color CCTV Camera

Model No. WV-CP474H

POWER 24V~60Hz 4.3W

VIDEO OUT 1V[p-p] 75Ω

Monufochured by Matsushita

SET

Communication industrial

Co.Ltd.

Yokohama Japan

Made in Japan

FOR COMMERDAL USE ONLY

Day /

GND

DUT

ALARM

Night

GND

POWER

!3!2

SA 1966	accompanying the appliance.	Serial No.

WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liq- uids, such as vases, shall be placed on the apparatus.

PREFACE

Panasonic's WV-CP474H series color digital camera introduces a new level of high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 771 horizontal pixels (picture elements), and digital signal processing LSIs. This model offers cutting-edge technology for advanced video surveillance.

PRECAUTIONS

1.Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Ask a qualified service personnel for servic- ing.

2.Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.

3.The installation should be made by qualified service personnel or system installers.

4.Do not use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.

5.Clean the CCD faceplate with care.

Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.

6.Never face the camera towards the sun.

Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.

7.Do not operate the camera beyond the specified temperature, humidity or power source ratings.

Use the camera at temperatures within –10 °C to +50 °C (14 °F - 122 °F), and humidity below 90 %. The input power source is 24 V.

8.Avoid do connections during a lightning storm. Otherwise, electric shock may be caused.

Caution:

To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the AC 24 V Input Cable.

Slide the panel to the left until it locks.

qAuto Iris Lens Connector

Connects the auto iris lens with a 4-pin male connector supplied as a standard acces- sory (Part No. YFE4191J100).

wFlange-back Adjusting Ring & Screw

Adjusts the back focal length and picture focus.

eLens (Option)

rCamera Mounting Screw Hole

Mounts the camera onto a mounting bracket.

tDown Button (D)

Moves the cursor downward and selects items in the CAM SET UP menu.

yLeft Button (L)

Moves the cursor to the left, selects the mode and adjusts some levels.

uUp Button (U)

Moves the cursor upward and selects items in the CAM SET UP menu.

iRight Button (R)

Moves the cursor to the right, selects the mode and adjusts some levels.

oSet Button (SET)

Activates an item selected in the CAM SET UP menu.

!0Video Output Cable with BNC Connector Connects the VIDEO IN connector of the monitor.

!1Power Cable

!2Alarm Output Terminal (ALARM OUT/GND)

Connects to the alarm input connector (terminal) of an external device. When the cam- era detects motion, the alarm output signal is supplied to the connected external device (Open collector output: 16 V DC, 100 mA max).

!3Day/Night Input Terminal (DAY/NIGHT IN/GND)

This terminal is used for connecting the camera to an external day/night detecting sen- sor.