
VMA633 6.5” TFT LCD Monitor
PRECAUTIONS:
耟 This monitor is intended for use in DC 12V, negative ground vehicles.
耟 Do not operate the monitor in ways other than described in this guide, doing so may cause damage and void the warranty.
耟 Be careful not to run down the car’s battery while using a multimedia system with the engine stopped. Doing so may damage the vehicle’s battery or the multimedia system.
耟 Do not disassemble or modify monitor. Doing so may damage it and void the warranty.
耟 Keep moisture away from the set. Water and humidity may damage the internal circuitry.
耟 Do not let the monitor become overheated. If the temperature inside the vehicle is high or the monitor has been exposed to direct sunlight, lower the monitor’s temperature before use. (The liquid crystal panel operates within a temperature range of
耟 In extremely cold temperature, the movement of the picture may slow and the picture may become dark. The monitor will work normally once the temperature increase to its normal operation range.
耟 Small black or shiny dots may been see inside the liquid crystal panel. These are normal when manufacturing liquid crystal products.
DESCRIPTION OF BUTTON AND CONNECTORS:
6.5 INCH WIDE LCD MONITOR | VMA633 |
1 | 2 | 3 | 4 | 5 | 6 |
| 7 |
|
|
|
| 8 |
|
|
|
| 9 |
|
|
|
| 10 |
|
|
|
| 11 |
|
|
|
| 12 |
|
|
|
| 13 |
|
|
|
1. | Power Button | 6. | Source Controls | 11.Speaker - |
2. | Dimmer Sensor | 7. | Video Composite Input | (White w.Black line) |
3. | Remote Sensor | 8. | 12.Speaker + (White) | |
4. | Picture Controls | 9. | IR Serial Remote OUT | 13.Dimmer Lead |
5. | Wide Mode Controls | 10. | (Orange) |
DESCRIPTION BUTTONS
2