Dell 2709W appendix Monitor Specifications, Power Management Modes, Pin Assignments, VGA Connector

5DVI connector-1

6DVI connector-2

7VGA connector

8Composite video connector

9Component video connectors

10Audio out (rear)

11Audio out (SUB/CTR)

12Audio out (front)

13USB upstream port

14USB downstream ports

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:

VESA Modes

Horizontal

Sync

Vertical Sync

Video

Power

Indicator

Power Consumption

Normal operation	Active	Active	Active	Blue	160 W (maximum)*
					105 W (normal)**
Active-off mode	Inactive	Inactive	Blanked	Amber	Less than 2 W
Switch off	-	-	-	Off	Less than 1 W

*With Audio and USB

**Without Audio and USB

Activate the computer and wake up the monitor to gain access to the OSD.

NOTE: This monitor is ENERGY STAR®-compliant as well as TCO '03 power management compatible.

NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

VGA Connector

Pin Number

1

2

3

4

5

6

7

15-pin Side of the Connected Signal Cable

Video-Red

Video-Green

Video-Blue

GND

Self-test

GND-R

GND-G