Trouble Shooting, Owner’S Manual, System does not

OWNER’S MANUAL

TROUBLESHOOTING:
Symptom	Cause	Solution

System does not	Fuse is blown.	Replace external fuse with the same
work		value.
	Power wires are not	Check the wire connections and
	connected.	Connect it properly.
The screen dark.	The brightness is adjusted	Check that the brightness is proper-
	too low.	ly adjusted, if not adjust it properly.
	Usage conditions are poor.	This may happen if the temperature
		in the vehicle is below –1°C (30°F) or
		above 45°C (113°F). Check again
		when the temperature is between
		-1°C (30°F) and 45°C (113°F)

SPECIFICATION:
GENERAL SPECIFICATIONS:
Power Requirement:	+12 Volts DC (9-16 Volts DC)
Power Consumption:	9 watts, Power On
	0.8 amps (800mA)
Weight	0.5 kg (1.1 lb)
Dimensions (w x h x d):	167 x 121 x 29 mm (6-1/2 x 4-7/10 x 1-3/10 in.)
Included Parts	LCD Monitor
	3.5 mm Male to Male IR extension cable (5m)
	2-pin Molex Power connector
	CCE-001 IR adapter for NAX9500E and/or VS718
	Mounting bracket
	Speaker extension cable (5m)

TROUBLE SHOOTING