·KEY FEATURES
•True Day/Night Performance
•Weather Resistant
•Rugged Aluminum Construction
•Resolution 450 TV Lines
•
•Total 18 Infrared LEDs with a CDS sensor
•Up to 40’ IR range (depends on scene reflection)
•
•60ft Cables (6pin Din to BNC/DC) & A/C Adapter Included
•Connect the Cameras to Any DVR Systems or a monitor/TV.
·INSTALLATION
1.Attach the mounting bracket to the desired location on the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the mounting bracket using the supplied screws.
2.Connect the one end (6pin Din) of 60’cable ① to the 2’breakout
cable. Make sure that two arrows on the top of them should be aimed at each other.
3.Connect the BNC (yellow) on the end of 60’cable ② to the one out of video inputs on the rear of DVR or a monitor/TV and DC jack (red) to
③ AC adapter (ADT123004). Plug the provided AC adapter (ADT123004) to AC outlet: refer to the illustration above.
If necessary, Connect the RCA (white) ④ to an audio input.
·SPECIFICATIONS
| Image Pickup Device | ¼” Color Image Sensor | |
| TV System | NTSC | |
| Array Size | 656 x 492 | |
| Image Area | 4.080 mm x 3.102mm | |
| Resolution | 450 TV Lines | |
| Minimum Illumination | 0 Lux @ (LED On), 0.1 Lux @F1.2 (LED Off) | |
| IR LED | 18pcs, Wave Length: 850nm | |
| S/N Ratio | More than 48db | |
Gamma Characteristics | 0.45 | ||
| Video Output | 1.0v | |
| Audio Output | 600 ohm Max, | |
| Microphone | Waterproof | |
| Exposure Time Range | 1/60s - 20µs | |
| Lens | 3.6mm Fixed Lens | |
| Current Consumption | 230 mA @ LED On | |
| Power Supply | DC 12V | |
Operational Temperature | |||
| Dimensions | 56(Ø) x 81(L) mm | |
| Weight | 1.1Lbs | |
·PACKAGE INCLUDES |
|
| |
|
| ||
4 | - True Day/Night Camera |
| |
4 | - 60' Cable (6pin Din to BNC/DC jack) | ||
4 | - Mounting Bracket |
| |
4 | - BNC to RCA Adapter |
| |
1 | - Mounting Screw Set |
| |
1 | - AC Power Supply with 4 DC Output | ||
1 | - Warranty Registration Card |
| |
1 | - Instruction Manual |
| |