Axis Communications 233D user manual Event Configuration, Event Servers

Page 33

AXIS 233D - Event Configuration 33

Event Configuration

This section describes how to configure the AXIS 233D for alarm handling. The AXIS 233D can be configured to perform certain actions when certain types of events occur.

Event type

A set of parameters describing how and when the Network Dome Camera is to perform certain actions

 

 

 

Triggered Event page 34

the circumstances that start an event

e.g. at a signal from an external device, such as a door switch or

 

 

a motion sensor

 

 

 

Scheduled Event page 36

the circumstances that start an event

e.g. at a pre-programmed time

 

 

 

Action

what occurs when the event triggers

e.g. uploaded video images to an FTP server, email notification,

 

 

etc.

 

 

 

Event Servers

Event Servers are used, e.g. for receiving uploaded image files and/or notification messages. To set up Event server connections in your AXIS 233D, go to Setup > Event Configuration > Event Servers and enter the required information according to the selected server type.

Server type

Purpose

Requires information

 

 

 

 

FTP Server

• used for uploading saved images

• Descriptive name of your choice

 

 

• User Name and Password (to FTP server)

 

 

• Upload path e.g. images/

 

 

• Port number e.g. port 21

 

 

• Use passive mode if there is a firewall between

 

 

the AXIS 233D and the FTP server

 

 

 

HTTP Server

• used for notification messages

• Descriptive name of your choice

 

• used for uploading saved images

• URL

 

 

 

• User Name and Password (to HTTP server)

 

 

• Proxy address/Proxy port (if required)

 

 

• Proxy User Name and Password (if required)

 

 

 

TCP Server

• used for notification messages

• Descriptive name of your choice

 

 

• User Name and Password (to TCP server)

 

 

• Port number e.g. port 80

 

 

 

 

For details on each setting, please refer to the online help files

which are available

from each web page.

 

 

Note: Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.

When the setup is complete, the connection can be tested by clicking the Test button (the connection test will take approximately 10 seconds).

Image 33
Contents Axis 233D About This Document Axis Customer Services Table of contents Axis 233D Product Overview Key FeaturesOverview IndicatorNetwork Terminal Restart button Control buttonColor Description Status LED IndicatorAccessing the Axis 233D Using the Network Dome CameraAxis 233D Using the Network Dome Camera Area Zoom Click-in-image movementPan/Tilt/Zoom Controls Pan/Tilt/Zoom Control QueueAxis 295 Video Surveillance Joystick Video Streams Stream TypesMotion Jpeg MPEG-4 protocols and communication methods RTP/RTSP/HTTP or RTP/RTSP/HTTPS How to stream MPEG-4Other methods of accessing the video stream Axis Media ControlOther MPEG-4 clients Configuring the Network Dome Camera Accessing the Setup ToolsOverview of the Setup Tools Image Settings Video & Image SettingsOverlay Image Settings Overlay SettingsGo to Setup Video & Image Overlay Image Video StreamPrivacy Mask Advanced Camera SettingsLow Light Behavior MPEG-4 Settings Audio mode Audio SettingsAudio Audio ChannelsAudio Output Audio InputAdvanced Audio Layout Live View ConfigCheck Show Custom Link ViewAction Buttons Html Examples Viewer SettingsSequence Mode External VideoWorking with External Video Sources Preset Positions Dome ConfigurationGuard Tour Osdi ZonesAdvanced Event Servers Event ConfigurationEvent Types How to set up a triggered eventTriggered Event Click Add triggered on the Event typesPre-trigger and Post-trigger buffers How to set up a scheduled event Scheduled EventClick Add scheduled on the Event types Motion Detection History Sensitivity Port StatusSystem Options User Settings check the corresponding checkboxes to enableSecurity IP Address Filtering802.1X Network Admission Control HttpsDate & Time Authentication processAxis 233D System Options Network Basic TCP/IP Settings IP Address ConfigurationServices DNS Configuration Network Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationNAT traversal port mapping Link-Local IPv4 AddressNetwork Traffic FTPQoS Quality of service QoS SettingsSmtp email UPnP MaintenanceBonjour Ports & devicesDefault router Subnet mask System time Support ConfigurationAdvanced Logs & ReportsResetting to Factory Default Settings Resetting to the Factory Default SettingsAbout Terminal Connectors Power connector block pin assignment table Power/AudioAC/DC+2 Terminal connector blocks Pin Function Description Power/AudioOutput Schematic Diagram Axis 233D I/O connectors and power Checking the Firmware Updating the Firmware TroubleshootingEmergency Recovery Procedure LED Indicator flash routine Support Using ARP Ping Symptoms, Possible Causes and Remedial ActionsSnapshot images Technical Specifications Connectors Alarm and eventPower MaintenanceRequirements WeightSystem integration SupportOptimizing your system General performance considerationsBandwidth Frame ratesAxis 233D Technical Specifications 802.1x IndexRadius Wide dynamic range
Related manuals
Manual 81 pages 50.8 Kb

233D specifications

Axis Communications, a pioneer in the field of network video solutions, has continually pushed the envelope in surveillance technology with its innovative products. Among its esteemed offerings, the Axis 233D stands out as a formidable tool for both security professionals and organizations seeking comprehensive monitoring solutions.

The Axis 233D is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for demanding surveillance environments. One of its main features is the ability to provide high-resolution video streaming at 30 frames per second, ensuring that users can capture clear and detailed images, even in dynamic situations. This camera supports a resolution of up to 2 megapixels, which enhances its ability to deliver crisp visuals, crucial for identifying individuals and objects in the monitored areas.

Equipped with advanced pan, tilt, and zoom capabilities, the Axis 233D can cover expansive areas with ease. The camera offers a 360-degree endless rotation for pan movements and a wide field of view, making it ideal for large spaces like parking lots, shopping centers, and public transport stations. The powerful zoom lens allows operators to focus on specific subjects from a distance, which is essential in security monitoring.

The Axis 233D also employs robust technologies to ensure excellent performance in various lighting conditions. With integrated WDR (Wide Dynamic Range), this camera can balance scenes with significant contrasts in lighting, ensuring that both bright and dark areas are clearly visible. Additionally, features like digital noise reduction contribute to clearer images in low-light situations, making it versatile for day and night operation.

Another characteristic that sets the Axis 233D apart is its network functionality. This camera supports Power over Ethernet (PoE), simplifying installation as it requires only a single Ethernet cable for both power and data transfer. It also leverages Axis' advanced video compression technologies, including H.264, which optimizes bandwidth usage while maintaining high image quality.

Furthermore, the Axis 233D is embedded with intelligent video analytics, enabling proactive monitoring. Functions such as motion detection and object tracking help users respond quickly to potential security threats. This capability is critical in real-time environments where each moment counts.

In summary, the Axis Communications 233D is a high-end surveillance solution that marries advanced technology with user-friendly features. With its PTZ functionalities, exceptional image quality, robust performance in varying light conditions, and intelligent analytics, it serves as an indispensable asset for security professionals looking to enhance their surveillance systems effectively. As security needs continue to evolve, the Axis 233D remains at the forefront of addressing those challenges.