Transportation

hardware configuration pages. Use the generated hardware pin chart. Make sure the product is disconnected from power (PoE/DC) while connecting devices to the product.

•For information about how to connect other wires, such as power wires to locks, readers and other devices, see the manufacturers’ instructions.

•When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Battery

The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.

Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs replacing.

The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at www.axis.com/techsup/ for assistance.

•Risk of explosion if the battery is incorrectly replaced.

•Replace only with an identical battery or a battery which is recommended by Axis.

•Dispose of used batteries according to local regulations or the battery manufacturer's instructions.