Burley TC700 Series user manual Contents, Unpacking, Service

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE

DEVICES

WARNING: Electrostatic-sensitive device. Use proper CMOS/MOSFET handling precautions to avoid electrostatic discharge.

NOTE: Grounded wrist straps must be worn and proper ESD safety precautions observed when handling the electrostatic-sensitive printed circuit boards.

CONTENTS
UNPACKING	5
TC700 Series - Camera, Lens,	Pan/Tilt, and
Receiver/Driver Modules	5
SERVICE	5
DESCRIPTION	6
INSTALLATION	6
Removing Module From Carton	6
OPERATION	6
Camera Control	6
Changing Operating Modes	6
AutoDome Commands	6
DIP Switches	8
Thumbwheel Switch	8
Camera Commands	8
ILLUSTRATIONS	11

UNPACKING

Unpack carefully. This is electro-mechanical equipment and should be handled carefully. See INSTALLATION for additional unpacking instructions.

Check for the following items:

TC700 Series: Camera, lens, pan/tilt, and receiver/driver. See TC700 Series - Camera, Lens, Pan/Tilt, and Receiver/Driver Modules for model numbers.

If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Philips Communication & Security Systems Inc. Sales Representative or Customer Service.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use

TC700 Series - Camera, Lens, Pan/Tilt, and Receiver/Driver Modules

Monochrome Models

Model No.	Sync System	Lens1	Receiver
TC750-4-1	EIA RS-170	4 to 40 mm	Allegiant biphase
TC750-4-2	EIA RS-170	4 to 40 mm	RS-232
TC750-6-1	EIA RS-170	5.8 to 58 mm	Allegiant biphase
TC750-6-2	EIA RS-170	5.8 to 58 mm	RS-232
TC750-9-1	EIA RS-170	8.7 to 87 mm	Allegiant biphase
TC750-9-2	EIA RS-170	8.7 to 87 mm	RS-232
TC750X-4-1	CCIR	4 to 40 mm	Allegiant biphase
TC750X-4-2	CCIR	4 to 40 mm	RS-232
TC750X-6-1	CCIR	5.8 to 58 mm	Allegiant biphase
TC750X-6-2	CCIR	5.8 to 58 mm	RS-232
TC750X-9-1	CCIR	8.7 to 87 mm	Allegiant biphase
TC750X-9-2	CCIR	8.7 to 87 mm	RS-232

Color Models

Model No.	Color System	Lens1	Receiver
TC770-4-1	NTSC	4 to 40 mm	Allegiant biphase
TC770-4-2	NTSC	4 to 40 mm	RS-232
TC770-6-1	NTSC	5.8 to 58 mm	Allegiant biphase
TC770-6-2	NTSC	5.8 to 58 mm	RS-232
TC770-9-1	NTSC	8.7 to 87 mm	Allegiant biphase
TC770-9-2	NTSC	8.7 to 87 mm	RS-232
TC770X-4-1	PAL B	4 to 40 mm	Allegiant biphase
TC770X-4-2	PAL B	4 to 40 mm	RS-232
TC770X-6-1	PAL B	5.8 to 58 mm	Allegiant biphase
TC770X-6-2	PAL B	5.8 to 58 mm	RS-232
TC770X-9-1	PAL B	8.7 to 87 mm	Allegiant biphase
TC770X-9-2	PAL B	8.7 to 87 mm	RS-232
TC790-4-1	NTSC	4 to 40 mm	Allegiant biphase
TC790-4-2	NTSC	4 to 40 mm	RS-232
TC790-6-1	NTSC	5.8 to 58 mm	Allegiant biphase
TC790-6-2	NTSC	5.8 to 58 mm	RS-232
TC790-9-1	NTSC	8.7 to 87 mm	Allegiant biphase
TC790-9-2	NTSC	8.7 to 87 mm	RS-232
TC790X-4-1	PAL B	4 to 40 mm	Allegiant biphase
TC790X-4-2	PAL B	4 to 40 mm	RS-232
TC790X-6-1	PAL B	5.8 to 58 mm	Allegiant biphase
TC790X-6-2	PAL B	5.8 to 58 mm	RS-232
TC790X-9-1	PAL B	8.7 to 87 mm	Allegiant biphase
TC790X-9-2	PAL B	8.7 to 87 mm	RS-232

1.All models include a 1/3-inch, f/1.8, 10X auto-iris zoom lens with auto-focus and pre-position with specified focal length.

SERVICE

If the unit ever needs repair service, the customer should contact the nearest Philips Communication & Security Systems Inc. Service Center for authorization to return and shipping instructions.

Service Centers

U.S.A. & Canada: 800-366-2283

Mexico & Central America: 52-5-688-1466

Europe & Middle East: 44-1932-765666

South America: 54-1-956-0837

Australia: 61-2-888-9000

New Zealand: 64-4-237-7297

5