Trouble Shooting

Problem	Possible Cause	Solution
No motion and no	Power supply is	Check power
video output	disconnected or	supply. Replace
	damaged.	if needed.

Normal Video output	Power supply voltage	Make sure to
but abnormal motion	is too low.	use the correct
		power supply.
		Move the power
		supply closer to
		the camera.

Have motion control,	Faulty coax	Check with
but no video	connection.	cable tester or
		verify cable by
		sending known
		good video
		signal through
		it.

Normal video output,	Camera protocol	Check the DIP
but no motion control	does not match	Switches.
	controller.