Point to Point Protocol PPP | Axis Communications 200+ manual

Point to Point Protocol (PPP)

PPPsupport allows you to use your AXIS 200+ remotely, just as if it were on your local network. Any PPP capable host can be used to dial into the AXIS 200+.

PPP configuration for a Windows 95 host

Please refer to the AXIS 200+ web pages should you wish to use PPP from another host, i.e. Windows NT or UNIX.

Follow these instructions to configure PPP from a Windows 95 host:

1.Connect the remote modem to the serial port of the AXIS 200+ (US Robotics modem recommended).

2.From the Windows desktop, double-click on the My Computer icon and then open Dial-Up Networking.

3.Double-click on Make New Connection. From within this dialog, define a <name> that describes the connection you are creating in the ‘Type name for the computer you are using’ field. Select a local modem from the displayed modem list.

4.Click on the Configure button to enter the modem Properties page. Accept all default settings, but ensure that modem speed is compatible with your modem and does not exceed 38,400 bps, which is the maximum serial port speed for the AXIS 200+.

5.Click the Connection tab and then click the Advanced button. Check the Hardware (RTS/CTS) radio button. Click OK to return to the ‘Make new connection’ dialog.

6.Enter the relevant phone number information for the remote modem connected to your AXIS 200+. Click Next.

7.Click Finish. The system then proceeds to build the Driver information database and your connection dialog will then subsequently appear in the Dial-Up Networking dialog.

Accessing the remote AXIS 200+

Follow this procedure to dial out to a remote AXIS 200+.

1.Double-click on the newly created icon to establish a modem connection for your remote AXIS 200+.

2.Enter your User name and Password an then click Connect. The status dialogs "dialing" and "logging onto the network" are presented prior to the display of a Connected to <name> dialog that will confirm a successful connection.

3.You can now access the AXIS 200+ by entering its Internet address (URL) into the location field of your Web browser. Please ensure that you are not using a a proxy server (Netscape: Options menu\Select Network\Proxies).

Please refer to your Windows 95 user documentation if your computer does not have dial up networking installed.