UNIX
Type the following commands:
arp
Example:
arp
6.Access the AXIS 200+ by entering its Internet address (URL) into the location field of your Web browser.
Example:
http://192.168.3.191/
7.The AXIS 200+ is delivered in approximate focus position, with focus set to infinity. If you need to fine adjust to close focus, carefully turn the smaller lens. If you cannot obtain a sharp picture, loosen the lock ring and bring the camera into focus by turning the larger lens. Tighten the lock ring afterwards. Reload your Web browser to test your adjustments.
The installation is complete and you can now include snapshots taken by the camera into your own applications.
Taking Snapshots
To trigger a camera snapshot, simply enter the URL of your camera into the location field of your Web browser.
These snapshot types are available within the AXIS 200+:
File name | Size | Description |
| (pixels) |
|
|
|
|
fullsize.jpg | 352 x 288 | Full size JPEG snapshot. Generation |
| 30 kbytes | time = 0.5 sec |
|
|
|
halfsize.jpg | 176 x 144 | Half size JPEG snapshot. Generation |
| 15 kbytes | time = 0.3 sec |
|
|
|
lastshot.jpg | 352 x 288 | The last snapshot taken by the |
| or | camera, either “full size” or “half |
| 176 x 144 | size”. |
|
|
|
hugesize.jpg | 704 x 576 | The highest resolution snapshot |
|
| available. As opposed to the ‘fullsize’ |
|
| and ‘halfsize’ images, this type of |
|
| snapshot is software generated. |
|
| Generation time = 18 sec |
|
|
|
zoom.jpg | 352 x 288 | Derived from the from the center of |
|
| ‘hugesize’. Generation time = 8 sec |
|
|
|