Samsung SNC-B5368P Day/Night, White BAL, You can specify a recording mode according to the scene

camera setup

DAY/NIGHT

You can specify a recording mode according to the scene.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)

1.Select <CAMERA SET> - <DAY/NIGHT>.

2.Select a screen transition mode according to the illumination, and set options as appropriate.

y DAY : Fixed to DAY mode, regardless of the scene.

y NIGHT : Fixed to NIGHT mode, regardless of the scene.

If BURST is set to <ON>, the burst signal will output.

y AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice versa.

y DAY€NIGHT / NIGHT€DAY : If set to <AUTO>, you can specify the brightness level triggering the mode switch between DAY and NIGHT as well as the interval.

y MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed.

Any excessively bright area in a night scene will be masked.

AUTO
BURST	OFF
DAY”NIGHT
BRIGHTNESS	MID
DWELL TIME	2S
NIGHT”DAY
BRIGHTNESS	MID
DWELL TIME	5S
MASK AREA	1 2
MASK AREA
<SIZE>
<LOCATION>

WHITE BAL

If you need to adjust the screen brightness, use the WHITE BALANCE function.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)

1.Select <CAMERA SET> - <WHITE BAL>.

2.Select a mode where you set the balance.

y DAY : You can set the RED, and BLUE value in DAY mode.

y NIGHT : You can adjust the <WHITE BAL> according to the ambient luminance.

	WHITE BAL
DAY/NIGHT			DAY
MODE	[	00] ----	ATW2
RED			I ----
BLUE	[	00] ----	I ----

24_ camera setup