Samsung SNC-B5368P Network Setup, To set the scheduled transfer, To set the video transfer mode

Page 60

setup screen

To set the scheduled transfer

You can set to transfer the JPEG image to the FTP/SMTP server at a specific interval.

1.Select <Event> - <Schedule>.

The Schedule Transfer setup window appears.

y Schedule transfer function :

If selecting <Enable>, the schedule transfer function will be activated; if selecting <Disable>, it will be deactivated.

y Transfer interval : You can set the time interval to transfer images.

You can set the unit of the interval to <seconds> or <minutes>; you can also set to transfer one image per 5/15/30/45/60 seconds, or one per 5/15/30/45/60 minutes. y Activation time : You can set a time to execute a specific command when a sched-

ule transfer event occurs.

-Always : Always sends an image at the set interval.

-Only scheduled time : Sends the image only on a specifi ed weekday, or time.

2.If you select Manual, input the date and time manually. Your settings will be saved.

NETWORK SETUP

To set the video transfer mode

You can control the transfer rate according to the video transfer mode and network speed.

1.Select <Network> - <Streaming type>. The Video Transfer setup window appears.

2.When done, click [Apply]. Your settings will be saved.

y VNP streaming : You can set the Samsung Protocol (VNP) for the streaming service.

-Protocol : Select a video transfer protocol from TCP*, UDP (Unicast)*, and UDP (Multicast)*.

Multicast backbone (MBone) is not supported; you can access the camera only in the multicast local network environment.

yRTP streaming : You can set the RTP Protocol or the streaming service.

- Protocol : Select a video transfer protocol from UDP (Unicast) and UDP (Multicast).

60_ setup screen

Image 60
Contents Network Camera Overview English FCC Statement Important Safety Instructions Contents Connecting to the Camera LoginInstalling ActiveX Using the Live ScreenProduct Features Recommended PC SpecificationsCompatible PoE Switches Compatible IP RoutersIP Installer CD WHAT’S IncludedScrew Signal of the camera outputs AT a GlanceAppearance DescriptionReset Button InsideConsists of two different ports GND Used for earth-groundingComponents LensTesting the camera Upper LidCeiling Release LockInstallation & connection Removing the CoversConnecting with Other Device Power SupplyConnecting to the monitor Power Monitor NetworkConnecting to the I/O port box Alarm I/O Wiring DiagramAlarm GND Alarm OUT Installation Precautions before installationInstalling the camera Installation & connection Adjusting the monitoring direction for the camera HOW to USE the Keyboard Controller You can configure the camera settings using the Web ViewerFactory Defaults Main MenuProfile Camera Setup Camera IDIris Backlight Select either BLC or WDRMotion DNRShutter SENS-UPYou can specify a recording mode according to the scene DAY/NIGHTWhite BAL Select Camera SET DAY/NIGHTDigital Zoom DetailAGC Color SUP ReverseZone Setup Privacy ZoneSelect the Pixel Level You will see dots on the screenFactory Default OthersOSD Color You can set the font color of the user interface The camera type may different, depend on the video signal System InfoLanguage You can check the system informationNetwork connection and setup Network connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANIP Address Setup Buttons used in IP InstallerURL Static IP Setup Manual Network SetupAuto Set English Auto Network Setup Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Connecting to the Camera from a Shared Local PCManual Port Range Forwarding Connecting to the Camera from a Remote PC VIA the Internet Ex http//mfffe42.websamsung.netConnecting to the Camera Using URLConnecting via URL If the Http port is other than Normally, you wouldLogin To check the Ddns addressInstalling Activex For Windows XP Service Pack 2 usersUsing the Live Screen Backup To capture the snapshotTo print out the screenshot To record a video Click on the scene to recordRecorded space, recording will be forcibly ended Click OK Setup screen Accessing the Setup ScreenDefault Setup To configure the video settingsContrast Adjust the contrast from 1 to Quality Adjust the picture quality from 1 toTo configure the IP settings Click Basic User User setup window appears To set the user accountCurrently opened web browser will be closed Setup screen System Setup When done, click Apply Selected language will be appliedTo set the display language To set the date/timeTo update the software To check the log informationSelect System Log Log information list appears To reset the system All Restores all settings to the defaultTo set the Https Click OK to restart the systemOverlay Setup To set the textYou can display text on the screen Event Setup To set the event transfer functionTo test the FTP transfer Click Test Verified will be displayedSetup screen To set an alarm image FTP transfer The image is sent to the specifi ed FTP addressTo set the alarm input Select Event Motion Motion Detection setup window appearsTo set the motion detection function To set a motion area Motion Detection function will operate on the selected areaNetwork Setup To set the video transfer modeTo set the scheduled transfer To set the Ddns DAY Mode ITSGaming ALCTerminology CavlcBitrate Control CBRConstant Bitrate VBRVariable BitrateSpecifications AI DC RAMDSP 4CIFSetup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip DdnsNtsc Http APISDK Frame Rate Ntsc EstimationHPelMPEG4 4CIF 30 FPS 15 FPS FPSMPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL 25 FPS 13 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Troubleshooting Problem SolutionVerify the settings in the following sequence NTP must be properly configuredMotion Detection Feature must be enabled Alarm Video Transmission must be enabledGPL/LGPL Software License GNU General Public LicensePreamble We protect your rights with two stepsProgram, and can be reasonably Page Page No Warranty How to Apply These Terms to Your New ProgramsEND of Terms and Conditions Preamble Terms and Conditions Source Code Basic PermissionsProtecting Users Legal Rights From Anti-Circumvention Law Conveying Verbatim Copies Conveying Modified Source VersionsConveying Non-Source Forms Installed in ROM Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsPatents Valid No Surrender of Others FreedomUse with the GNU Affero General Public License GNU Lesser General Public License END of Terms and ConditionsPreamble Page Page Page Page Page How to Apply These Terms to Your New Libraries OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License Copyright C1995-1998 Eric Young
Related manuals
Manual 105 pages 61.02 Kb Manual 106 pages 9.51 Kb Manual 104 pages 7.14 Kb Manual 104 pages 6.18 Kb